Menus
For installer
Menu
5.5
DHW capacity
To select tank heating capacity
to variable or standard. Variable
capacity heat up tank with
fast mode and keep the tank
temperature with effi cient mode.
While standard capacity heat up
tank with rated heating capacity.
5.6
Buffer tank connection
To connect tank to the system
and if selected YES, to set
T temperature.
5.7
Base pan heater
To select whether or not
optional base pan heater is
connected.
* Type A - The base pan heater
activates only during
deice operation.
* Type B - The base pan heater
activates when outdoor
ambient temperature is
5 °C or lower.
5.8
Alternative outdoor sensor
To select an alternative outdoor
sensor.
5.9
Bivalent connection
To select to enable or disable
bivalent connection.
Yes
To select either auto control
pattern or SG ready input
control pattern or smart control
pattern.
* This selection only display
to select when optional pcb
connection set to Yes.
32
Default Setting
Setting Options / Display
Variable
No
Yes
Set T for Buffer
5 °C
Tank
No
Yes
Set base pan heater
A
type*.
No
No
Auto
Buffer tank
10:34am,Mon
T for Buffer tank
Range: (0 ° C~10 ° C)
Steps: ±1 ° C
Select
Confirm
Auto
SG ready
Smart
° C
5