Canon varioPRINT 120 Customer Expectation Document page 21

Max Ring Binder Pedestal Setup
IMPORTANT
• The Canon varioPRINT 120 was created to be modular in design. Floor space,
budget, monthly copy/print volume, and applications will determine which
configuration works best.
• The large configuration includes the Main Unit, Duplex Color Image Reader-D1,
ePIM-C1, Document Insertion Unit-F1, High Capacity Stacker-E1 (x 2) or High
Capacity Stacker-G1 (x 2), Paper Folding Unit-F1, Saddle Finisher-AK2, Booklet
Trimmer-D1, and Two-Knife Booklet Trimmer-A1.
• The optional High Capacity Stacker-G1 is not shown in the configuration
diagrams above.
• The optional SDD Square Fold Booklet-Maker with Two-Knife Trimmer is not
shown in the configuration diagrams above. If the SDD Square Fold
Booklet-Maker with Two-Knife Trimmer is attached to the machine, make sure
that there is approximately 62.6" (1,592 mm) of space added to the installation
space and floor design.
• The optional SDD Square Fold Booklet-Maker is not shown in the configuration
diagrams above. If the SDD Square Fold Booklet-Maker is attached to the
machine, make sure that there is approximately 43.3" (1,100 mm) of space
added to the installation space and floor design.
Version 13
Three Pedestals with Ramp to the Left Side
Three Pedestals with Ramp to the Front
varioPRINT 120 Customer Expectations Document
varioPRINT 120 Customer Expectations Document
Page 21