Download Print this page

Lindy WUBR-501 User Manual

Wireless n usb dongle

Advertisement

Quick Links

Wireless N USB Dongle
User Manual
LINDY No. 52014
www.lindy.com
2. Enter a profile name then click "Next"
3. Select the "Network Type" and click on the drop-down arrow and
select "Peer-to-Peer". Then use the up/down arrows to select the
channel number and click "Next"
4. Select "Authentication Mode" to enable the "Encryption" if you
have any security concern. Once you enable the encryption
function, then you should input the corresponding key. Click "Next"
5. In IP Setting select "Enable" or "Disable" to make used of it and
click "Complete" to finish the configuration
Access Point: Connects to the network via an Access Point
1. Click the "AP List" tab
2. Select the wireless network you would like to join from the list
shown
3. Click "Connect" to join the network
4. Input the password required to join the network
Note: You might need to configure a profile if the destination
network has "WEP KEY" protection
Wi-Fi Protected Setup (WPS):
This is a standard for easy and secure establishment of a wireless
home network, created by the Wi-Fi Alliance. The goal of the WPS
protocol is to simplify the process of connecting any home device to
the wireless network. To secure your wireless network, select the
"WPS" button under user interface as below:
Introduction
Thank you for purchasing the LINDY Wireless N USB Dongle. This
product complies with IEEE 802.11n draft 2.0 wireless specifications and
is also backward compatible with 802.11g. This USB Dongle has
integrated MIMO (multi in, multi out) technology which enhances
coverage range and delivers 6x greater performance. With the ability to
achieve incredible data rates of up to 300Mbps, you can enjoy high
speed internet access for data, video and voice at the home or office. To
ensure your wireless network is secure against hackers, the PCI Card
incorporates the latest WPA2 encryption, WPA with AES and TKIP.
Installation
English
IMPORTANT
Do not install the USB Dongle in your computer till you have
installed the software.
1.
Insert the driver CD in to your CD-Rom drive and follow the on
screen instructions
2.
Select WUBR-501 and then click next
3.
Follow the on screen instructions and then shutdown your
computer
4.
Install the PCI card in to your computer and power on
5.
Follow the on screen instructions and choose "Install the
software automatically (recommended)..."
6.
The configuration utility will appear on the taskbar when the
installation is complete
Wireless Network Setup
Peer-to-Peer: Connects with other wireless client(s)
This option does not require an Access Point. Please make sure
the "Network Name" (SSID or ESSID) and "Peer-to-Peer" channel
are the same for all clients in the same wireless network. Double
click on the Configuration Utility icon to open the utility.
1. Click on "Profile Setting" tab and click "Add" to create a new
profile
There are two ways to enable WPS connection:
1. PBC mode: Choose a Router in the list then click "PBC" button
2. PIN mode: Choose a Router in the list and check the PIN codes
are the same between Router and Client then click "PIN" button

Advertisement

loading
Need help?

Need help?

Do you have a question about the WUBR-501 and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for Lindy WUBR-501

  • Page 1 Introduction Thank you for purchasing the LINDY Wireless N USB Dongle. This product complies with IEEE 802.11n draft 2.0 wireless specifications and is also backward compatible with 802.11g. This USB Dongle has integrated MIMO (multi in, multi out) technology which enhances coverage range and delivers 6x greater performance.
  • Page 2 United Kingdom del proprio Stato. In 2006 the European Union introduced regulations (WEEE) for the LINDY No.’s 52014 collection and recycling of all waste electrical and electronic equipment. It is no longer allowable to simply throw away electrical and electronic www.lindy.com...

This manual is also suitable for:

52014