Table of Contents
Advertisement
22BDL7439L
Step 7.
Tighten the screw bolts (
1
LED display (if necessary). Firmly tighten the screw bolts to secure the cabinets to the mounting bracket (
Step 8. (for combination of xxBDL7439L and xxBDL7539L)
For installation of two types of cabinets with different side angles, appropriate clearance between two cabinets must be
considered. Follow the installation steps below.
Tighten the screw bolts (
1
Use the feeler gauges to ensure accurate gap is reserved between the cascaded cabinets. Insert 2 pieces of 0.5mm feeler gauge
into the gap between two parts as illustrated below (
The feeler gauges are not provided with the product.
Adjust the flatness of the LED display (if necessary). Firmly tighten the screw bolts to secure the cabinets to the mounting bracket (
).
3
After installation is complete, pull out the feeler gauges.
). Repeat the above steps until all cabinets are mounted onto the bracket. Adjust the flatness of the
). Repeat the above steps until all cabinets are mounted onto the bracket.
2
).
0.5 mm
0.5 mm
18
).
2
1
2
1
3
2
Advertisement
Table of Contents
