Table of Contents
Advertisement
Adding Printer
This section describes the procedure for adding a printer to your Mac.
To re-add a printer that was deleted, open System Settings -> Printers & Scanners, click Add Printer,
Scanner or Fax..., and then perform the procedure described below.
If your printer is connected via USB, and you connect the USB cable to a Mac, the printer is automatically
added. The below procedure is not necessary in this case.
1.
1. Check whether Default is selected in the displayed dialog
Note
• It may take a little time for your printer to appear.
2. Select the printer
2.
Select the printer listed as Bonjour Multifunction.
Note
• Check the following if printer does not appear.
Printer is on
Firewall function of the security software is off
In case of Wi-Fi connection: Printer is either connected to the wireless router or directly
connected to the PC (Direct Connection)
In case of wired LAN connection: Printer is connected to the network device via LAN cable
3. Select your printer or Secure AirPrint from Use
3.
4.
4. Click Add
The printer is added to your Mac.
340
Advertisement
Table of Contents
