Table of Contents
Advertisement
G3740pr-0920
7/1/04
11:58 PM
F
WARNING
Children can be harmed by small parts,
sharp edges and sharp points in the
vehicle's unassembled state, or by electrical
items. Care should be taken in unpacking
and assembly of the vehicle. Children
should not handle parts, including the
battery, or help in assembly of the vehicle.
1
#8 x
3
/
" Screw
4
Washer
• Turn vehicle upside-down.
• Place washers on two #8 x
#8 x
3
/
" screws with washers through the vehicle body
4
and into the rear fender flare, as shown.
• Using a short shafted Phillips screwdriver, tighten
the screws.
• Repeat this procedure to secure the other rear fender
flare to the vehicle body.
Page 10
Assembly
#8 x
Washer
Screw
Rear
Fender
Flare
Bottom View
3
/
" screws. Insert the two
4
2
#8 x
3
/
"
4
Slot
Tab
• Fit the tab on the rear fender flare into the slot on the
center fender flare (see inset).
• Position the center fender flare onto the bottom edge of
the vehicle, making sure that the three holes in the
center fender flare are aligned with the three holes in
the vehicle.
• Insert three #8 x
flare and into the vehicle. Tighten the screws.
• Repeat this procedure to assemble the other center
fender flare to the other side of the vehicle.
10
3
/
" Screws
4
Rear
Center
Fender Flare
Fender
Tab
Flare
3
/
" screws through the center fender
4
Advertisement
Table of Contents
