Honda CLARITY Fuel Cell 2021 Owner's Manual page 421

You can calibrate the system from the
customized feature on the audio/information
screen.
1. Set the power mode to ON.
2. Select .
3. Select Settings.
4. Select Vehicle.
5. Select TPMS Calibration.
6. Select Cancel or Calibrate.
u When the calibration is complete, the
display returns to the customization
menu screen.
• If the Calibration Failed To Start.
message appears, repeat steps 4-6.
• The calibration process finishes
automatically.
uuWhen DrivinguTire Pressure Monitoring System (TPMS)
1TPMS Calibration
The low tire pressure/TPMS indicator may come on
under the following conditions:
•
There is a heavier and uneven load on the tires than
the condition at calibration.
•
Tire chains are used.
•
The calibration process requires approximately 30
minutes of cumulative driving at speeds between
30-65 mph (48-105 km/h).
•
During this period, if the power system is turned on
and the vehicle is not moved within 45 seconds,
you may notice the low tire pressure/TPMS
indicator comes on briefly. This is normal and
indicates that the calibration process is not yet
complete.
If tire chains are installed, remove them before
calibrating the TPMS.
If the low tire pressure/TPMS indicator comes on even
when the properly inflated specified regular tires are
installed, have your vehicle checked by an authorized
Honda Clarity Fuel Cell dealer.
We recommend that the tires be replaced with the
same brand, model, and size as the originals. Ask an
authorized Honda Clarity Fuel Cell dealer for details.
419