Honda CLARITY Fuel Cell 2021 Owner's Manual page 111

Message
● Appears when you press the fuel fill door release
button with the power mode in ON.
Appears when you set the power mode to ON
●
without fastening the driver's seat belt.
Appears if the gear position has been automatically
●
changed to
vehicle out of
seatbelt fastened.
Appears when you try to change the gear position
●
without depressing the brake pedal while the
transmission is in
Appears when you try to change the gear position
●
without releasing your foot off the accelerator pedal
while the transmission is in
uuIndicatorsuDriver Information Interface Warning and Information Messages
Condition
( P and the driver attempts to take the
( P but does not have his or her
P or N .
( (
( P or N . (
Explanation
● Set the power mode to VEHICLE OFF, then press the fuel
fill door release button.
Fasten the seat belt properly before you start to drive.
●
2 Shift Operation P. 379
Depress the brake pedal, then select a shift button.
●
Release your foot off the accelerator pedal, then select
●
a shift button.
Continued 109