VIPAR SPECTRA Timer Control VT300 User Instructions page 2

Setting system with Control Knob
Digital Display OVERVIEW
Main menus: Sub-menus of "H-SE":
: VEG channel : Start-working time
: BLOOM channel : Off-working time
: Timer setting : Current time
Setting Process
Press the knob to start clockwise
to increase value
brightness
rotate
rotate
the knob
the knob
counterclockwise
press the knob
to decrease value
same method as setting
press the knob
flashing
rotate rotate rotate
the knob the knob the knob
press the knob
same method as setting
press the knob
same method as setting
Actions OVERVIEW
Action
Press the knob
Rotate clockwise
Rotate counterclockwise
NOTE:
1. Keep pressing the knob around 3 seconds can turn off the light.
2. System will save settings and back to superior menu if no action within 3-5 seconds.
select desired
3. Timer controls both channels on/off together. Cannot turn VEG and BLOOM channel
brightness
on/off separately.
press the knob to save
desired brightness and
go to next step
clockwise
select desired hour
to increase value
press
the knob
counterclockwise
to decrease value
Function
1. power on/off 2. change mode 3. save settings
1. enter mode 2. increase value (+1)
1. enter mode 2. decrease value (-1)
clockwise
flashing select desired minute
to increase value
rotate
the knob
counterclockwise
wait about 3-5 seconds to
save desired start-working
to decrease value time and go to next step
WARRANTY TERMS
1. We offer three years warranty for all of our products purchased against manufacturing
defects, from the date of purchase. If you need warranty assistance, please contact us as
soon as possible.
2. The warranty does not cover damage due to high moisture levels, water, power
surges, improper hanging/mounting, improper use, dust build-up or user modifications.
3. For USA buyers, if any lights stop working within 30 days, you can choose:
(A) Exchange. We will email you a pre-paid return label, please ship the light
back to our USA warranty center. A replacement will be sent to you for free as
soon as we received the defective light.
(B) Money back. We will email you a pre-paid return label, please ship the light
back to our USA warranty center. You will get your money back as soon as we
received the defective light.
Repairing. We can send parts free of charge immediately if you'd like to repair
simple defect. Or we will email you a pre-paid return label to bring light back, then ship
back to you after we repair it. All for free.
4. For buyers outside of the USA, if any lights stop working within 30 days, you can choose:
(A) Exchange. Please ship the light back to our warehouse, buyer pays return
shipping. A replacement will be sent to you for free as soon as we received the
defective light.
(B) Money back. Please ship the light back to our warehouse, buyer pays return
shipping. You will get your money back as soon as we received the defective light.
(C) Repairing. We can send parts free of charge immediately if you'd like to repair
simple defect.
5. To all customers: if any lights stop working over 30 days after delivery, please contact us
to get a satisfactory solution.
6. If a light is sent in with damage that is not covered under warranty, we may still
be able to perform warranty service, however that is at our discretion and repairs
may bear a cost which will be assessed prior to repairing the light.
7. Our company reserves the interpretation right of this warranty structure. If you
have any questions about our warranty policy, please contact us.
Customer Service
Email: support@viparspectra.com
Phone: 1-844-504-3266(United States)