VIPAR SPECTRA Timer Control TC1800 User Instructions

USER INSTRUCTIONS
Timer Control Series
MODEL: TC1800
12pcs IR look dim
For flowering stage: use all channels with 100% brightness.
This light includes IR (Infrared) LEDs which look dim/invisible, they are not faulty LEDs.
Three fans will work while VEG channel on, the rest three fans will work while BLOOM channel on.
The digital display will be turned off so it will not illuminates/emits blue light during light off-working time.
Specifications:
Model: TC1800 HID Replacement:
LED Power: 1800W Vegetative Coverage at 48":
Actual Power Draw: Flowering Coverage at 36":
110V: 820W±3%; 220V: 790W±3%
LED Quantities: Use for:
360pcs Epiled/Bridgelux LEDs
<
Total Harmonic Distortion: Housing Dimensions:
15%
Input Voltage: AC100-240V Item Weight:
Frequency: 50-60Hz Lifespan:
Setting system with Remote
To turn ON/OFF the light.
To increase value.
Switch to other setting.
To setup brightness for
VEG channel.
To setup light's start-working
time.
Step 1. Remove the plastic separator from the battery.
Step 2. Press to turn on the light.
Step 3. Press to setup brightness for VEG channel. Using
VEG
1800W HPS/MH
desired brightness. Press
6x6ft
Step 4. Press , repeat step 3 to setup brightness for BLOOM channel.
5x5ft BLOOM
all stages grow and flowering
Step 5. Press to setup current time of day, the hour will flash. Using
CLOCK
38 x 16.5 x 3 inches
96.5 x 42 x 7.5 cm select the desired hour. Press
Using and , select the desired minutes. Press
34 lbs
≥ 100,000 hours about 3 seconds and the programmed time will be automatically saved.
www.viparspectra.com
02
To preview start-working
PREVIEW
and off-working time.
To save settings.
Switch to other setting.
OK
To decrease value.
To setup brightness for
BLOOM
VEG
BLOOM channel.
To setup current time of day.
To setup light's off-working
ON CLOCK OFF
time.
VIPAR SPECTRA
and , select the
to save settings.
OK
and
or to save the hour and activate the minutes.
to save settings, or wait
OK
Step 6. Press
to setup light's start-working time, the hour will flash. Using
ON
, select the desired start-working hour. Press
activate the minutes. Using and , select the desired minutes. Press
save settings, or wait about 3 seconds and the programmed time will be automatically
saved.
Step 7. Press
, repeat step 6 to setup light's off-working time.
OFF
Step 8. Press to confirm that the system has saved the desired start-working and
PREVIEW
off-working time.
Note: Timer controls both channels on/off together. Cannot turn VEG and BLOOM channel
on/off separately.
Using Suggestions
The following section will help guide you in the process of evaluating the best methods
for each stage of plant growth. Like many other growers, you can use this light throughout
the seeding and flowering stages of your plants life. Remember to properly adjust the height
and brightness of your light according to your plants desired level for optimal growth.
TC1800 Height (above plants' canopy)
3-5 days acclimation period 56" - 60"
Seedlings/ Young vegetative 52" - 56"
Vegetative Stage 44" - 52"
Flowering Stage 32" - 40"
Adjust the height and brightness accordingly to desired coverage and how well each individual
plants responds as the brightness increases. The key is to always observe your plants and listen
to what they're telling you. If the leaves are pointing hard towards the light, they love it! Give
,
them more! If they shy away or appear limp and unhappy, while all other components and
environmental variables are correct, back off with the light! They'll let you know very quickly how
they feel. This is of course... the key to horticulture in general.
and
or to save the hour and
to
OK
Using Hours Brightness (VEG/BLOOM)
10 on / 14 off 40 / 15
12 on / 12 off 60 / 30
18 on / 6 off 100 / 60
12 on / 12 off 100 / 100