Warnings; General Safety; First Use; Intended Use - Beko WMB 50831 PT User Manual

Table of Contents

Advertisement

Available languages

Available languages

2

Warnings

Please read the following information.
Otherwise, there may be the risk of
personal injury or material damage.
Moreover, any warranty and reliability
commitment will become void.

General Safety

Never place your machine on a carpet
covered floor. Otherwise, lack of airflow
from below of your machine may cause
electrical parts to overheat. This may
cause problems with your washing
machine.
If the power cable or mains plug is
damaged you must call Authorized
Service for repair.
Check water hoses for wear. Do not
use old/used water inlet hoses. These
may cause stains on your laundry.
Fit the drain hose into the discharge
housing securely to prevent any
water leakage and to allow machine
to take in and discharge water as
required. It is very important that the
water intake and drain hoses are not
folded, squeezed, or broken when the
appliance is pushed into place after it is
installed or cleaned.
Your washing machine is designed to
continue operating in the event of a
power interruption. You cannot cancel
any program by pressing the "On/Off
button." Your machine will not resume
its program when the power restores.
Press the "Start/Pause/Cancel" button
for 3 seconds to cancel the program
(See, Cancelling a Program)
There may be some water in your
machine when you receive it. This is
from the quality control process and
is normal. It is not harmful to your
machine.
Some problems you may encounter
may be caused by the software.
Press "Start/Pause/Cancel" button
for 3 seconds to cancel the program
set in your machine before calling the
authorized service.

First Use

To prepare your machine for washing,
carry out your first washing process
without loading your machine and
with detergent under "Cottons 90°C"
program.
Ensure that the cold and hot water
connections has been made correctly
when installing your machine.
Otherwise, your laundry may come out
hot at the end of the washing process
and may wear out.
If the current fuse or circuit breaker is
less than 16 Amperes, please have a
qualified electrician install a 16 Ampere
fuse or circuit breaker.
While using with or without a
transformer, do not neglect to have the
grounding installation laid by a qualified
electrician. Our company shall not be
liable for any damages that may arise
when the machine is used on a line
without grounding.
To make your machine ready for use,
please be sure that the tap water
supply and water drainage systems
are appropriate before calling the
authorized service. If they are not,
call a qualified plumber to have any
necessary arrangements carried out.

Intended use

This product has been designed for
home use.
The appliance may only be used for
washing and rinsing of textiles that are
marked accordingly.
Only detergents, softeners and
supplements suitable for washing
machines may be used.
Observe the care instructions labelled
on textile products and any other
instructions given by companies that
produce detergents for your machine.
This appliance is not intended for use
by persons (including children) with
reduced physical, sensory or mental
capabilities, or lack of experience
and knowledge, unless they have
been given supervision or instruction
concerning use of the appliance by a
person responsible for their safety.
38
EN

Advertisement

Chapters

Table of Contents
loading

Table of Contents