Table of Contents
Advertisement
en Familiarising yourself with your appliance
5 Familiarising yourself with your appliance
5.1 Control panel
You can use the control panel to configure all functions of your appliance and to obtain information about the operat-
ing status.
Switching the appliance on or off
Switching noise reduction on or off
Switching the AirFresh function on or off
Decreasing the fan setting
Increasing the fan setting
Switching intensive modes on or off
Switching the fan run-on on or off
Switching the lighting on or off
Setting the brightness
6 Before using for the first time
Configure the settings for initial start-up. Clean the ap-
pliance and accessories.
6.1 Setting an operating mode
Your appliance is set to air extraction mode by default.
Note: When using it in circulating-air mode, you require
additional accessories.
7 Basic operation
7.1 Switching on the appliance
▶
Press
.
a The appliance starts at fan setting 2.
7.2 Switching off the appliance
▶
Press
.
7.3 Selecting a fan setting
▶
Press or .
7.4 Switching on intensive mode
If particularly strong odours or vapours develop, you
can use intensive mode.
1.
To switch on intensive mode 2, press .
appears on the display.
a
6
5.2 Display
You can see the current setting values in the display.
-
▶
When using it in circulating-air mode, set the operat-
ing mode.
2.
To switch on intensive mode 1, press
appears on the display.
a
a After approx. 6 minutes, the appliance automatically
switches to fan setting 3.
7.5 Switching off intensive mode
▶
Press .
7.6 Switching on the fan run-on
During the fan run-on, the appliance continues to run
for a short time and then switches off automatically.
▶
Press
a The fan run-on starts at fan setting 1.
a The appliance switches off automatically after ap-
prox. 10 minutes.
Noise reduction function
Fan settings
Fan run-on
AirFresh function
again.
Advertisement
Table of Contents
