General Tv Operation - VESTEL 50FA7500 Operating Instructions Manual

Smart 50" led tv
Table of Contents

Advertisement

Available languages

Available languages

General TV Operation

Using the Channel List
The TV sorts all stored stations in the Channel List.
You can edit this channel list, set favourites or set
active stations to be listed by using the Channel List
options.
Note: The commands Move, Delete and Edit name in the
Edit Channel List menu may not be available according to
Opreting Mode setting in the TKGS Installation menu. To
get rid of all restrictions on configuring the channel list set this
option to TKGS Off. Move command will be still available if
this option is set to Customizable.
Configuring Parental Settings
To prohibit viewing of certain programmes, channels and
menus can be locked by using the parental control system.
To display parental lock menu options, the PIN number
should be entered. The factory default PIN number is
0000. After coding the correct PIN number, parental
settings menu will be displayed.
Menu Lock: Menu lock setting enables or disables
the menu access.
Maturity Lock: When set, this option gets the maturity
information from the broadcast and if this maturity
level is disabled, disables access to the broadcast.
Child Lock: When Child Lock is set, the TV can only
be controlled by the remote control. In this case the
control panel buttons will not work.
Set PIN: Defines a new PIN number.
Note: If the Country option is set to France, you can use 4725
as the default code.
Electronic Programme Guide (EPG)
Some, but not all channels send information about the
current and next programmes. Press the "
to view the EPG menu.
Up/Down/Left/Right: Navigate EPG.
OK: Displays programme options.
i (INFO): Displays, in detailed, information on the
programme selected.
GREEN: Switches to List Schedule EPG.
YELLOW: Switches to Timeline Schedule EPG.
BLUE: Displays filtering options.
Programme Options
In EPG menu, press the OK button to enter the
Event Options menu.
Select Channel
In EPG menu, using this option, you can switch
to the selected channel.
Set Timer / Delete Timer
After you have selected a programme in the EPG
menu, press the OK button. Select the Set Timer on
Event option and press the OK button. You can set
a timer for future programmes. To cancel an already
set timer, highlight that programme and press the
OK button. Then select "Delete Timer" option. The
timer will be cancelled.
About Smart Guide (optional)
This feature finds programme informations from the
database via the internet, where the EPG information
via the broadcast is not available. Informations
provided from this database are marked with an
asteriks(*) character and will appear like other EPG
informations in the channel info banner and EPG
menus. This service needs active internet connection
and could not be available due to the condition of
the network.
Advanced EPG and Extended Programme
Info Banner
If your TV is connected to a network the Advanced
EPG screen will be displayed by pressing the Epg
button on the remote. In this advanced mode of EPG
application all the informations about the programmes
are collected from the internet database.
You can navigate through the application using the
coloured buttons via the defined short-cuts for each.
Follow the on-screen instructions.
Extended Info Banner
A network connection is also needed to access
extended programme info banner. Press the Info
button on the remote twice to open the extended
Info bar. Using left or right buttons you can see the
previous or next programmes of the channel being
" button
watched. Informations such as Programme type,
channel name etc. can be seen on the info banner.
CONNECTIVITY FUNCTIONS
Wired Connectivity
To Connect to a Wired Network
• You must have a modem/router connected to an
active broadband connection.
• Ensure that Nero Media Home software is installed
to your PC.(for DLNA function). See Nero Media
Home Installation" section.
• Connect your PC to your modem/router. This can
be a wired or wireless connection.
• Connect your TV to your modem/router via an
ethernet cable. There is a LAN port at the rear
(back) of your TV.
English - 42 -

Advertisement

Chapters

Table of Contents
loading

Table of Contents