Sharp XL-MP110E Quick Start Manual page 2

Listening to a CD or MP3/WMA disc
1
Press the CD button.
2
Press the
CLOSE button to open the disc tray 1.
3
Place the disc on the disc tray 1, label side up.
4
Press the
5
You can place discs on trays 2 - 5 by following steps 2 - 4.
6
Press the
Listening to the radio
1
Press the TUNER (BAND) button repeatedly to select the desired
frequency band (FM or AM).
2
Press the TUNING (
tion.
When the TUNING button is pressed for more than 0.5 seconds, scan-
ning will start automatically and the tuner will stop at the first re-
ceivable broadcast station.
To receive an FM stereo transmission:
Press the TUNER (BAND) button to display the
" "
will appear when an FM broadcast is in stereo.
XL-MP110EE QG
Downloaded from: http://www.usersmanualguide.com/
1 button and within 5 seconds, press the
"
12 cm (5 ) 8 cm (3
OPEN/CLOSE button to close the disc tray 1.
/ button to start playback.
or ) button to tune in to the desired sta-
"
ST
FM stereo mode indicator
FM stereo receiving indicator
2
Listening to a cassette tape
1
Press the TAPE button.
OPEN/
2
Open the cassette compartment by
pushing the area marked
"
EJECT .
"
)
3
Load a cassette into the cassette
compartment with the side to be
played facing you.
4
Press the
If trouble occurs
When this product is subjected to strong external interference
(mechanical shock, excessive static electricity, abnormal supply
voltage due to lightning, etc.) or if it is operated incorrectly, it may
malfunction.
If such a problem occurs, do the following:
1. Set the unit to the stand-by mode and turn the power on again.
2. If the unit is not restored in the previous operation, unplug and
plug in the unit, and then turn the power on.
Note:
If neither operation above restores the unit, clear all the memory by
resetting it.
Clearing all the memory (reset)
1. Press the ON/STAND-BY button to enter the power stand-by
mode.
2. Whilst pressing down the ¶ 8
X-BASS/DEMO button, press the TUNING
"
CLEAR AL
Caution:
"
indicator.
This operation will erase all data stored in memory including clock,
timer settings, tuner preset, and CD programme.
Maintenance
Routine maintenance is required for continued optimum perfor-
mance, refer to the operation manual.
"
PUSH
/ button to start playback.
¶ 8 button and the
¶ 8 ¶ 8
¶ 8
"
appears.
2/28/05, 7:20 PM
button until