Table of Contents
Advertisement
a When the time has elapsed, a signal sounds. The
time shown in the display is zero.
When the cooking time has elapsed:
4.
To stop the signal early, press any touch field.
‒
To set another cooking time, press
‒
the control ring to set the time.
To continue without setting a cooking time, press
‒
to start.
When the food is ready, press
‒
appliance off.
Changing the cooking time
You can change the cooking time at any time.
Press
.
1.
Use the control ring to change the cooking time.
2.
Press
to confirm.
3.
Cancelling the cooking time
You can cancel the cooking time at any time.
Press
.
1.
Use the control ring to reset the cooking time to
2.
zero.
Press
to confirm.
3.
To continue without setting a cooking time, press
‒
to start.
10.4 Setting the end time
You can delay the time at which cooking is due to fin-
ish by up to 23 hours and 59 minutes.
Notes
¡ In order to achieve a good cooking result, do not
delay the end time once the appliance is already in
operation.
¡ Food will spoil if you leave it in the cooking com-
partment for too long.
11 AutoPilot
The "AutoPilot" operating mode helps you to use your
appliance to prepare different dishes by selecting the
optimum settings automatically.
11.1 Cookware
The cooking result depends on the composition of the
meat and the size of cookware.
You should therefore use heat-resistant cookware that
is suitable for temperatures up to 300 °C. Glass or
glass ceramic cookware is best. The joint should cover
approx. two thirds of the cookware base.
Cookware made from the following material is not
suitable:
¡ Bright, shiny aluminium
¡ Unglazed clay
¡ Plastic or plastic handles
Requirements
¡ An operating mode and temperature or setting have
¡ A cooking time is set.
and use
1.
2.
3.
a The display shows the start time. The appliance is in
to switch the
a Once the start time has been reached, the appli-
a When the time has elapsed, a signal sounds. The
4.
Changing the end time
In order to achieve a good cooking result, only change
the set end time before operation starts and the cook-
ing time is counting down.
1.
2.
3.
4.
Cancelling the end time
You can delete the set end at any time.
1.
2.
3.
4.
a The appliance starts to heat and the cooking time
11.2 Settings for the dishes
To make the dishes perfectly, the appliance uses differ-
ent settings.
Note: The cooking result depends on the quality and
composition of the food. Use fresh and, ideally, chilled
food.
Information on the settings
Once you start a dish, the display shows relevant
information for this dish, e.g.:
¡ Suitable shelf position
¡ Suitable accessory or cookware
¡ Added liquid
¡ Time for turning or stirring
Programmes
The ideal type of heating, temperature and cooking
time are preset for programmes.
been set.
Press
again.
Use the control ring to delay the end time.
Press to start.
standby mode.
ance starts to heat up and the cooking time starts
counting down.
time shown in the display is zero.
When the cooking time has elapsed:
To stop the signal early, press any touch field.
‒
To set another cooking time, press
‒
the control ring to set the time.
To continue without setting a cooking time, press
‒
to start.
When the food is ready, press
‒
appliance off.
Press to pause operation.
Press
twice.
Use the control ring to change the end time.
Press to continue operation.
Press to pause operation.
Press
twice.
Use the control ring to reset the end time to zero.
Press to continue operation.
counts down.
When this time is reached, a signal sounds.
AutoPilot en
and use
to switch the
13
Advertisement
Table of Contents
