Advertisement
In The Box
Fan Motor x 1
Fan Regulator x 1
Wiring Diagram
NOTE!
The Wires are coloured with
the following code:
(Brown - Live; Blue - Neutral;
Green/Yellow - Earth)
E
Earth
N
Incoming
240V~
L
Double Pole
Switch
*Switch shown not included
Assembly Instruction
Ceiling
Hook
Ensure that the safety rope passes
through the fan hook and then securely
Safety
fastened using the screw provided.
Rope
Middle Cover x 2
Fan Blade x 3
Bottom Cover x 1
M6 Screw
ü
Screw
Fan Regulator
Plastic Sleeve
Align fan blade hole to the motor and mount
using the M6 screws. Repeat for other fan
blades.
*Use PH2 stubby phillips screwdriver and 10mm
spanner.
Rotate bottom canopy till
wires slotted in correctly with
minimal gap clearance as
shown.
Check gap clearance before tightening
bottom canopy using the bottom screw
holes provided.
Slide top canopy to the ceiling
and tighten using the screw hole
provided before assembling and
tightening the middle cover.
Loosen the screw and lower top canopy
to the middle cover and tighten.
Screw Hole
Remove plastic sleeve from the
thread before tightening the
bottom cover.
*Clockwise direction to fasten
û
Advertisement
