Download Print this page
UMS 260 AC User Manual

UMS 260 AC User Manual

60" (1500 mm) ceiling fan

Advertisement

Quick Links

CAUTION !
1.
Ensure this appliance is properly earthed.
2.
Ensure that the ceiling hook can sustain more than 10 times
the Ceiling Fan weight.
3.
Do not replace any part other than UMS brand. This is to
ensure optimal performance and safe for use.
4.
Do not attempt to repair the fan! Kindly return the fan to our
authorized service agent.
5.
If unusual oscillating movement is observed, immediately
stop using the ceiling fan and contact either the
manufacturer, service agent or dedicated qualified persons.
6.
This fan must be mounted at least 3.0m (10ft) above ground.
7.
Disconnect power supply before performing assembly,
disassembly or repair.
8.
It is recommended to examine the fan at least once every 2
years
SPECIFICATION
Fan
Voltage
Frequency Wattage
Size
240V
60"
50Hz
AC
*Specifications will vary and subject to change without prior notice
United MS Electrical Mfg (M) Sdn Bhd
Lot 5, Jalan Ipoh, Batu 17 1/2, Rawang Industrial Estate,
48000 Rawang, Selangor
Air
C.O.P
Delivery
250
3.0
80W
3
3
m
/min
m
/min/W
Speed
(RPM)
L
H
90
260
This appliance is not to be handle by any person (including children) with
reduced physical, sensory or mental capabilities, or lack of experience and
knowledge, unless they are surpervised by a professional or have been given instructions.
60" (1500mm)
Ceiling Fan
UMS 260 AC
User Manual
Read this manual completely before operating this appliance.
Children are highly advised not to play with this appliance.
Rev 1.4 (8/23)

Advertisement

loading

Summary of Contents for UMS 260 AC

  • Page 1 Ensure that the ceiling hook can sustain more than 10 times 60" (1500mm) the Ceiling Fan weight. Do not replace any part other than UMS brand. This is to Ceiling Fan ensure optimal performance and safe for use. Do not attempt to repair the fan! Kindly return the fan to our UMS 260 AC authorized service agent.
  • Page 2 In The Box Align fan blade hole to the motor and mount M6 Screw using the M6 screws. Repeat for other fan blades. *Use PH2 stubby phillips screwdriver and 10mm spanner. Fan Motor x 1 Middle Cover x 2 Rotate bottom canopy till ü...