Installing the Toothbrush Head
Make sure that the toothbrush head is installed in the same direction
as the front of the toothbrush handle, and make sure there is a slight
gap in between the toothbrush head and the handle. (The gap is
designed to prevent the toothbrush head from colliding with the
handle during high-frequency vibration, so as to generate more
power from the motor.)
How to Use
Introduction to brushing modes
Standard Mode: Suitable for daily oral hygiene.
Gentle Mode: Suitable for sensitive teeth.
Custom Mode: A two-minute advanced mode by default. More
features and modes can be configured in the Mi Home/Xiaomi Home
app including brushing duration, splash prevention for ten seconds,
beginner mode, sensitive mode, advanced mode, additional features,
etc. These settings are available in Custom Mode.
Turning on/off
On/Off button
Turning on: Press the button to turn on the toothbrush.
The toothbrush will enter Standard Mode by default
when powered on for the first time.
Turning off: Press the button to turn off the toothbrush.
Changing mode/power
Mode/Power button
Changing modes: When the toothbrush is powered on,
press the button to change modes.
Stepless power adjustment: When the toothbrush is
powered on, press and hold the button to adjust the
power in a stepless manner.
Notes: The brushing timer restarts every time the power
is changed. Every power adjustment is only made to the
current mode. Power in other modes is not affected.
0.4–1.0mm
5