Door Handle Installation - Koolatron KBWC7SS User Manual

INSTALLATION

DOOR HANDLE INSTALLATION

1) Pull away the door gasket in the area where the handle is to be installed on the left side as shown
below in Fig. 1. The gasket is easily displaced by hand, no tools are necessary.
2) Align the handle with the screws installed. Tighten the screws using a Phillips head screwdriver
until the handle sets both flush and secured tightly against the door frame. (DO NOT over tighten
as this will cause damage to the handle assembly).
3) Replace the door gasket to its original position.
1. door gasket
2. screws
3. Phillips screwdriver
4. handle
Fig. 1
Fig. 2
4
OPERATING INSTRUCTIONS
Recommended temperature settings
Wine conservation 12°C - 14°C (53°F - 57°F)
Rose and sparkling 5°C - 8°C (41°F - 46°F)
Dry/White 9°C - 12°C (48°F - 53°F)
Red 14°C - 18°C (59°F - 65°F)
*Temperature °C may varies between <+ 2°C
CONTROL PANEL
POWER • Turn the machine on or off
• Press this key for 3 seconds to turn it on or off
°C/°F • Press this key for 3 seconds to select your choice of temperature scale,
LIGHT Celsius to Fahrenheit
• Turn the interior light on and off by pressing this key
LED Temperature Display Window
LOCK • Press this key for 3 seconds to unlock (15 seconds will lock automatically without
UP any action)
• Press this key to increase the temperature setting by one unit °C / °F
DOWN • Press this key to lower the temperature setting down by one unit °C / °F
• Long press this key, first ring, and then ring two times, is the working mode of
the lamp: the lights will be on for 10 minutes, the lights will automatically go out
• Press this key, first ring, and then three ring continuously, is the working mode of
the lamp two: The lights will be long bright
• The two modes can be cyclically switched
• It is normal that the preset temperature and display temperatures are different when using for the
first time. It will take approximately 1 hour for the unit to stabilize the temperature. Fill the unit with
your choice of wine bottles. Allow 2-3 hours of operation before they reach the desired temperature.
• The temperatures may fluctuate depending on whether the interior light is ON or OFF or the bottles
are located on the upper/middle/lower section.
• If the appliance is powered off suddenly, wait for 5 minutes before turning the unit on. It will return
to the settings applied, the temperature setting is with automatic memory function.
5