Table of Contents
Advertisement
Available languages
Available languages
13.3 The inlet hose
Do not use an extension hose if
the inlet hose is too short. Con-
tact the service centre for the re-
placement of the inlet hose.
Water-stop device
13.4 Water drainage
There are different procedures to con-
nect the drain hose:
45
45
45
O
O
O
20
20
20
O
O
O
A
• Connect the hose to the appliance.
Turn the inlet hose only left or right.
Loose the ring nut to set it in the cor-
rect position.
• Connect the water inlet hose to the
cold water tap with 3/4 thread.
CAUTION!
Make sure that there are no leaks
from the couplings.
The inlet hose has a water stop device.
This device prevents water leaks in the
hose because of its natural ageing. The
red sector in the window «A» shows this
fault .
If this occur, close the water tap and
contact the service centre to replace the
hose.
ENGLISH
29
Advertisement
Chapters
Table of Contents
