Sony IPELA SNC-RZ25N Install Manual page 50

To attach the camera to a tripod
Use a tripod with screws meeting either of
the following specifications.
ISO standard: length 4.5 mm ±0.2 mm
ASA standard: length 0.197 inches
Notes
• To attach a tripod, use the tripod mounting
screw hole and attach the tripod firmly
with a screwdriver.
• Install the tripod on a flat surface.
16
GB
Installing the Camera
To attach a wide conversion lens
The camera's lens portion is threaded. To
attach the conversion lens you use, align the
lens with those threads, and turn it to the
right to attach it securely.
length
Acceptable wide conversion lenses should
weigh less than 100 g (4 oz), and should not
exceed the dimensions given in the
illustration below.
Notes
In order to prevent the wide conversion lens
from falling, follow the advice given below.
• Consult with an experienced contractor or
• Be sure that the lens is tightened securely,
• Do not use a wide conversion lens in an
• Check periodically, at least once a year, to
31
25 ( / )
32
15
37 (1 / )
32
installer to take countermeasure to ensure
the wide conversion lens does not come
loose and fall.
as far as it will go.
environment where it is subject to
vibration or shock.
ensure that the connection has not
loosened. If conditions warrant, make this
periodic check more frequently.
Screw tapping
used to attach
the camera
Camera
side
1
3 ( / )
8
Unit: mm (inch)