Sony IPELA SNC-RZ25N Install Manual page 45

The alarm output is used to control
connected peripheral devices by
synchronizing with an external sensor
input, the built-in activity detection
function, a manual trigger button, Day/
Night function or the timer function.
For details on each function and
required settings, see the User's Guide
stored in the supplied CD-ROM.
For pin assignment and wiring, see "Pin
Assignment and Use of I/O Port" on
page 28.
The I/O Port of this unit corresponds to
the VISCA command. However, there
are some commands which are not
supported.
Bottom
qf
qd Tripod mounting hole
Use this hole to attach a commercially
available tripod when attaching the
camera to the tripod.
qf Ceiling bracket mounting screw
holes
When installing the camera to the
ceiling, secure the supplied ceiling
brackets to these holes using the
supplied screws.
qd
Location and Functions of Parts and Controls
11
GB