Sunnydaze Decor KF-DCR36 Quick Start Manual

Read this manual carefully before using this product and save it for future reference.
No. Parts
A Panel
T
Bolt (M5x10mm)
U Washer
V
Nut
Y
Wrench
Z
Poker
T U V
ASSEMBLY
Tool required for assembly, Wrench (Y), is included.
DO NOT FULLY TIGHTEN THE NUTS & BOLTS BEFORE ASSEMBLING THE ENTIRE RING.
1. Set Panels (A) upright and align the holes on the inside of the panels.
2. Connect the panels by hand-tightening 1x Bolt (T), 2x Washers (U), and 1x Nut (V) on the top of the
panels as shown. Repeat this step on the bottom of the panels.
3. Repeat Steps 1 & 2 until all panels are connected.
4. Tighten all hardware using Wrench (Y).
653616
Purchase Date:
Thank you for choosing Sunnydaze Decor. We stand behind our brand and the quality of the items we
sell. Replacement parts or products will be sent at our discretion within the 1-year warranty period. Proof
of purchase, with the date of purchase as well as photos of the merchandise defect, must be provided.
Photos are used to determine the cause of defects and for future quality control. Register your warranty at
www.serenityhealth.com/warranty/
If you have any questions, comments or concerns, feel free to contact us by phone at 888-881-4668, by email:
customerservice@serenityhealth.com, or via our contact us page at
DIAMOND FIRE RING
KF-DCR36
Qty.
• Do not discard packaging until you have checked that all parts are accounted for.
4
• Assemble components on a soft, clean surface to avoid scratching or damaging
the finish.
8
• Keep children away during assembly. This item contains small parts that can
16
be swallowed by children.
8
• Children should always be under direct adult supervision around this product.
1
1
Y
Z
/ / Order/Customer Reference Number:
T U
04/2019
www.SerenityHealth.com/contact-us/
U V
Page 1 / 2