Samsung NX58R9421SS User Manual page 42

Troubleshooting
Problem Cause
Very large or The wrong burner orifice
yellow surface is installed.
burner flames.
Surface burners The oven door lock is
light but oven turned on.
burners do not
light.
The Gas Pressure
Regulator shut off switch
is in the off position.
Oven
Problem Cause
The oven control There may be an issue
beeps and displays with your oven. See the
an information "Information codes" chart
code. on page 46.
42 English
Action
Check the burner orifice size.
Contact your installer if you
have the wrong orifice (LP
gas instead of natural gas or
natural gas instead of LP gas).
The display will show the Lock
icon. Hold the oven door open
and press the START/SET pad
for 3 seconds. The oven will
beep and the Lock icon will
turn off.
Call a qualified service
technician.
Action
Press the OFF/CLEAR pad, and
then restart the oven.
If the problem persists,
disconnect all power to the
range for at least 30 seconds
and then reconnect the power.
If this does not solve the
problem, call for service.
Problem Cause
The oven will not The oven is not
turn on. completely plugged into
the electrical outlet.
A fuse in your home
may be blown or the
circuit breaker may have
tripped.
The oven The oven temperature
temperature is too needs to be adjusted and
hot or cold. recalibrated.
The oven burner The oven door lock is
will not shut off. turned on.
The Sabbath function has
been activated.
Action
Make sure the electrical plug
is fully inserted into a live,
properly grounded outlet.
Replace the fuse or reset the
circuit breaker.
See page 30.
The display will show the Lock
icon. Hold the oven door open
and press the START/SET pad
for 3 seconds. The oven will
beep and the Lock icon will
turn off.
SAb and the time of day will
show in the display. All other
controls and signals will be
deactivated. To turn off the
oven only, press the OFF/
CLEAR pad.
To cancel the Sabbath function
and reactivate the controls
and signals, press and hold
the Bake and NUM 1 pads
simultaneously for 3 seconds.