Table of Contents
Advertisement
Quick Links
Thank you for purchasing our products. To get the best performance of this product and fully
utilize all the functions provided by this system, please read this manual carefully before
using this system, and if you do not understand anything, please consult your local dealer, or
contact us directly.
Our company is constantly striving to provide product performance and quality, and product
technology and design are subject to upgrade without notice.
1 Safety
The safety voltage range of this system is AC175-250V 50Hz.
• Read this manual.
• Retain this note.
• Pay attention to all warnings.
• Comply with all instructions.
• Do not use this product near water.
INFOBIT AV
iSpeaker DAP10
Dante Active full-range speakers, 10"
User Manual ENV1.0
www.infobitav.com
info@infobitav.com
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for infobit iSpeaker DAP10
Summary of Contents for infobit iSpeaker DAP10
- Page 1 DAP10 Dante Active full-range speakers, 10” User Manual ENV1.0 Thank you for purchasing our products. To get the best performance of this product and fully utilize all the functions provided by this system, please read this manual carefully before using this system, and if you do not understand anything, please consult your local dealer, or contact us directly.
- Page 2 B. Hanging system must be installed by qualified professional installers to check the well. Danger: The sound box system must be suspended by personnel with knowledge of broken parts and suspension techniques, each other or directly installed on the bracket INFOBIT AV www.infobitav.com info@infobitav.com...
- Page 3 2.1 Hanging example. 2.1.1 Hanging ring suspension. 2.1.2 Hanging (optional) 3. In-package components iSpeaker DAP10 308x480x290 8x35 galvanized lifting ring Instruction manual Certificate of Conformity Warranty Card 3.1 Selection of accessories...
- Page 4 6. Maintenance Normal use of the speaker does not require special maintenance, it is recommended that the following routine checks can be. INFOBIT AV www.infobitav.com info@infobitav.com...
- Page 5 7.2 No sound in some bands • The equalization settings are not correct. Please make sure the filtering and equalization settings of the mixer, preamplifier, equalizer and all other equipment are correct, working properly and well connected. INFOBIT AV www.infobitav.com info@infobitav.com...
- Page 6 03: Input XLR port (mixer or processor direct input) 04: Output XLR port 05: Volume control 06: RS232 remote volume control 07: Power indicator 08: Limiting/Clipping indicator 09: Main power switch of the equipment 10: ICE power input connector INFOBIT AV www.infobitav.com info@infobitav.com...
- Page 7 9. Specifications Model iSpeaker DAP10 10"(250 mm) ferrite bass, 1.5"(34 mm) ferrite treble Unit configuration drive Frequency response (±3dB) 50Hz-20kHz Rated power 120W Sensitivity (1W/1m) 90dB Maximum noise pressure level (SPL) 118dB Standard impedance 8Ω 80°x 80° Covering Angle (H x V)
- Page 8 1 x XLR balanced input, 1 x XLR balanced output Active power amplifier module 200W Volume knob control Central control interface RS232 Lifting accessories U-shaped rack Size (W x H x D) 308 x 486 x 290 mm Net weight (kg) 12.2kg INFOBIT AV www.infobitav.com info@infobitav.com...
Need help?
Do you have a question about the iSpeaker DAP10 and is the answer not in the manual?
Questions and answers