1. Manuals
  2. Brands
  3. Cimetrics Manuals
  4. Network Router
  5. B2000
  6. Manual

Cimetrics B2000 Manual

Modbus/tcp to modbus/rtu router
Hide thumbs
1
2

Advertisement

Table of Contents

1

Your B2000

(Modbus/TCP to Modbus/RTU router)
Router must be configured before use!
(NOTE: An Ethernet HUB or crossover cable is required)
Access the B2000 configuration screen using your browser. Here is an explanation of
how to do this:
Connect the B2000 Ethernet connector to an Ethernet hub, and run another Ethernet cable from that hub to
your laptop or PC. Make sure that the laptop or PC is the only other unit in this small LAN. NOTE: If you do
not have a hub, you can use a "crossover cable" to connect between the B2000 and your laptop.
Set your PC's IP address to
192.168.88.90
with a subnet mask of 255.255.255.252.
1

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the B2000 and is the answer not in the manual?

Questions and answers

Related Manuals for Cimetrics B2000

Summary of Contents for Cimetrics B2000

  • Page 1 Connect the B2000 Ethernet connector to an Ethernet hub, and run another Ethernet cable from that hub to your laptop or PC. Make sure that the laptop or PC is the only other unit in this small LAN. NOTE: If you do not have a hub, you can use a "crossover cable"...
  • Page 2 User=admin password=admin The Cimetrics default password is a secure mixture of letters and numbers but also can be remembered because of the relationships of these keys on your computer keyboard. From within the browser interface you can change all settings in the entry fields to configure your router For improved access security, you should change your password from the default values.

Table of Contents