Table of Contents
Advertisement
Maintenance
Figure 17 Mirror
Note:
The glass mirror and the aluminium mirror are slightly different mounted.
The four screws (10) hold the aluminium reflector directly while four leaf springs (18)
hold the glass mirror/reflector.
8. Unscrew the three screws (11) which hold the lamp carrier (13).
9. Take off the lamp carrier (13) leading the cable carefully through the hole in the centre
base (19) and put this assembly aside.
10. Continue with demounting either
the glass reflector:
or the aluminium reflector:
The reflector is removed.
Operating Instructions SW450/A-2000
a. Unscrew the four screws (10) and take off the leaf springs.
b. Cut open silicone seam from the glass reflector with a knife and remove
the mirror from its retaining ring.
a. Unscrew the four screws (10) and take off the reflector from its rest.
Ver 2.0 -07 /2023
18
19
10
11
13
Article no: 30078456001
33
Advertisement
Table of Contents
