Table of Contents
Advertisement
Door handle
Door handle
Press the finger-bar inside the door handle to open the door.
To open the door turn the handle in the manner illustrated in fig.
"DOOR SECURITY" indicator light
The " Door Security " indicator light is illuminated when the door is fully closed and the machine is ON.
When " Start/Pause" is pressed on the machine with the door closed the indicator will flash
momentarily and then illuminate.
"DOOR SECURITY" indicator light
If the door is not closed the indicator will continue to flash.
The " Door Security " indicator light is illuminated when the door is fully closed and the machine is ON.
When " Start/Pause" is pressed on the machine with the door closed the indicator will flash
A special safety device prevents the door from being opened immediately after the end of the cycle.
momentarily and then illuminate.
Wait for 2 minutes after the wash cycle has finished and the " Door Security " light has gone out
before opening the door. At the end of the cycle turn the programme selector to "OFF " .
If the door is not closed the indicator will continue to flash.
A special safety device prevents the door from being opened immediately after the end of the cycle.
"START/PAUSE" button
Wait for 2 minutes after the wash cycle has finished and the " Door Security " light has gone out
before opening the door. At the end of the cycle turn the programme selector to "OFF " .
Press to start the selected cycle .
"START/PAUSE" button
NOTE: When the "START/PAUSE" button has been pressed,
Press to start the selected cycle .
the appliance can take few seconds before it starts
working.
NOTE: When the "START/PAUSE" button has been pressed,
the appliance can take few seconds before it starts
working.
Changing the settings after the programmes has started (PAUSE)
Press and hold the "START/PAUSE" button for about 2 seconds, the flashing lights on the
options buttons and time remaining indicator will show that the machine has been paused,
Changing the settings after the programmes has started (PAUSE)
adjust as required and press the "START/PAUSE" button again to cancel the flashing lights.
Press and hold the "START/PAUSE" button for about 2 seconds, the flashing lights on the
If you wish to add or remove items during washing, wait 2 minutes until the safety device
options buttons and time remaining indicator will show that the machine has been paused,
unlocks the door.
adjust as required and press the "START/PAUSE" button again to cancel the flashing lights.
When you have carried out the manoeuvre, close the door, press "START/PAUSE" button and
If you wish to add or remove items during washing, wait 2 minutes until the safety device
the appliance will continue working where it left off.
unlocks the door.
When you have carried out the manoeuvre, close the door, press "START/PAUSE" button and
CANCELLING THE PROGRAMME
the appliance will continue working where it left off.
To cancel the programme, set the selector to the "OFF" position.
Select a different programme.
CANCELLING THE PROGRAMME
Re-set the programme selector to the "OFF" position.
To cancel the programme, set the selector to the "OFF" position.
Select a different programme.
Re-set the programme selector to the "OFF" position.
44
A
A
B
B
C
C
Advertisement
Table of Contents
