Table of Contents
Advertisement
This monitor can be mounted on the dash and can be
mounted on both horizontal and vertical surfaces.
Make sure the view is suitable to the driver to observe
the images. Take care not to block any necessary
viewing area when mounting. Before mounting the
system, permanently hook up all connections to
ensure proper operation.
1.
After determining the monitor location, position
the monitor support bracket, mark the bolt hole
location, and then drill the holes. Be careful not to
drill into any other surface that may be hidden.
2.
Attach monitor bracket. Mount the monitor to
the support bracket with supplied 4 angle adjustment
screws.
3.
Connect one end of the power cable (wire) to the
proper connections. Connect the other end of the
power cable (plug) to the monitor; connect the monitor
and the camera with the 13-pin system connecting
cable.
Waterproof Aviation
Connectors
SYSTEM COMPONENTS
Mounting Monitor
Camera Connection
Secondary Waterproof Sleeve
Slides Over Aviation Connection
Thru-wall Gasket to Seal
Thru Vehicle Exterior
Advertisement
Table of Contents
