Sony FWD-42PV1 Operating Instructions Manual page 11

Optional adaptors (Not supplied)
The connectors marked with 7 on the connector
panel are slot-in types and can be fitted with any of
the optional adaptors in the display; BKM-FW10,
BKM-FW11 or BKM-FW12.
(A BKM-FW10 is the same as the connectors 7 .)
For details on installation, consult your Sony dealers.
COMPONENT/RGB Input Adaptor BKM-FW11
(Not supplied)
1
2
3
1 Y/G P /C /B P /C /R IN (BNC) : Connects to the
B B R R
analog RGB signal or component (YUV) signal
output of a piece of video equipment or a
computer.
2 HD VD IN : Connects to the synchronization
signal output of a computer.
3 AUDIO (Stereo minijack) : Inputs an audio
signal. Connects to the audio output of a piece of
video equipment or a computer.
Location and Function of Parts and Controls
RGB/COMPONENT ACTIVE THROUGH
ADAPTOR BKM-FW12 (Not supplied)
1
2
3
1 RGB/COMPONENT IN (D-sub 15-pin) :
Connects to the component signal output or analog
RGB signal output of a piece of video equipment or a
computer.
For details on inputting a component signal to the
connector, see "Pin assignment" on page 46 (GB).
2 RGB/COMPONENT OUT (D-sub 15-pin) :
Connects to the component signal input or analog
RGB signal input of a piece of video equipment or a
computer.
3 AUDIO IN (Stereo minijack) :
Inputs audio signal. Connects to the audio signal
output of a piece of video equipment or a computer.
Note
When the unit is not connected to an AC power or is
in the standby mode, no signal is output from the
RGB/COMPONENT OUT.
For details on other optional adaptors (Not supplied),
consult your Sony dealer.
11
(GB)