Table of Contents
Advertisement
6.
Insert the Red Hat
OK, then press <Enter>.
Insert your driver disk into /dev/fd0
and press "OK" to continue.
The drivers for the RAID card are installed to the system.
When asked if you will load additional RAID controller drivers, select No, then
7.
press <Enter>.
More Driver Disks?
Do you wish to load any more
driver disks?
Yes
8.
Follow the onscreen instructions to finish the OS installation.
9.
If you install RHEL AS5, when the installation is completed, DO NOT click
Reboot. Press <Ctrl> + <Alt> + <F2> to switch to the command-line interface
from graphic user interface.
10. Type the following commands when using a Legacy floppy.
mkdir /mnt/driver
mount /dev/fd0 /mnt/driver
cd /mnt/driver
sh replace_ahci.sh
reboot
ASUS Z8NH-D12 Series
Enterprise RAID driver disk to the floppy disk drive, select
®
Insert Driver Disk
OK
Back
No
6-15
Advertisement
Table of Contents
