Asus Xonar D2X User Manual page 48

4 Recording Selector
button
5 Recording Volume
Slider
6 Left/Right Balance
7 Reset
8 S/PDIF-In Advanced
Setting
9 Microphone-In
Advanced Setting
42
Click this button to select the path/source you are going to
record. Please note that the recording function on Windows
is a one-path selector. So, you can select only one default
recording source at a time. You may have to restart the
recorder program if you switch to a different source. (Note:
On Vista, some application programs may allow you to
select the recording device/path in the recording programs
themselves.)
Drag this slider down to decrease the recording volume; drag
up to increase the recording volume. The tool-tip reveals the
percentage number from 1 to 100 in terms of the full scale
level.
This horizontal slider controls the volume between the left
and right channels.
Reset all volume controls to the default settings
Click this button
S/PDIF-In:
Enabling "Validity Check" will check out the PCM audio
validity bit of S/PDIF input stream to prevent recording or
monitoring non-PCM/not recordable audio (such as AC3,
etc.), which will become unrecognizable sounds from your
speakers.
Click this button
Microphone-In:
Enabling "Microphone Boost" will increase a volume gain
to boost microphone input signals. For typical low-cost PC
it's recommended to enable this function.
microphone,
ASUS Xonar D2X
to open the advanced settings for the
to open the advanced settings for the