Asus Xonar D2X User Manual page 60

No Item
1 Audio Options
2 Driver Mode
3 Playback Timing
Master
4 Recording Timing
Master
5 Sample Rate
6 Bit-depth
7 ASIO Panel
For other applications that support ASIO, such as WaveLab, Cubase, Reason,
Winamp, etc, the setup will be very similar to the above.
54
Description
Step 1 is to open the "Audio Options" window from the
Options tab.
Step 2 is to select "ASIO" as the driver mode in Advanced
tab. (WDM and MME are Windows driver types) The
changes will take effect after you restart the program next
time.
After step 2, Sonar LE will display 4 output drivers: "ASUS
Xonar D2X ASIO Out -00~06". Make sure you are using 00
or another one.
After step 2, Sonar LE will display 1 input driver: "ASUS
Xonar D2X ASIO In -00". Make sure you are using it.
Step 5 is to select the default file sample rate (44.1, 48, 96,
or 192KHz) for your Sonar project.
Step 6 is to select the default file bit-depth (16/24bit) for your
project.
If you would like to configure bit-depth (16/24bit) and latency
(1ms~300ms) of the Xonar D2X ASIO driver, click this ASIO
panel to reset them. The changes will take effect the next
time you start the program.
ASUS Xonar D2X