Before First Use; Daily Use - Washing Only - Zanussi ZWD86SB4PW User Manual

Hide thumbs Also See for ZWD86SB4PW:
Table of Contents

Advertisement

Use this option for persons allergic to detergents
and in areas where the water is soft.
The related indicator comes on.
DELAY START
With this option you can delay the start of a
programme from 30 minutes to 20 hours.
The display shows the related indicator.
FLEX TIME
Press Flex Time to decrease the programme time.
SETTINGS
CHILD LOCK
With this option you can prevent that the children
play with the control panel.
To activate/deactivate this option, press
and
at the same time until the indicator
comes on/goes off.
You can activate this option:
After you press
programme knob are locked.
Before you press
start.
PERMANENT EXTRA RINSE
With this option you can permanently have an extra
rinse when you set a new programme.

BEFORE FIRST USE

During installation or before first use
you may observe some water in the
appliance. This is residual water left in
the appliance after a full functional test
in the factory to ensure the appliance
is delivered to customers in perfect
working order and is no cause for
concern.
1. Connect the mains plug to the mains socket.
2. Open the water tap.

DAILY USE - WASHING ONLY

WARNING! Refer to Safety chapters.
18
: the options and the
: the appliance cannot
You can select:
QUICK: to wash items with daily soil.
SUPER QUICK: to wash quickly items with
almost no soil.
Some programmes accept only one of
these options.
To activate/deactivate this option press
and
at the same time until the indicator
comes on/goes off.
ACOUSTIC SIGNALS
The acoustic signals operate when:
The programme is completed.
The appliance has a malfunction.
To deactivate/activate the acoustic signals,
press
and
at the same time for 6 seconds.
If you deactivate the acoustic signals,
they continue operate when the
appliance has a malfunction.
3. Put 2 litre of water in the detergent
compartment for washing phase.
This activates the drain system.
4. Put a small quantity of detergent in the
compartment for washing phase.
5. Set and start a programme for cotton at the
highest temperature without laundry.
This removes all possible dirt from the drum and the
tub.
LOADING THE LAUNDRY
1. Open the appliance door.
2. Empty the pockets and unfold the items before
you put them in the appliance.

Advertisement

Table of Contents
loading

Table of Contents