Assembly - Husky H62MWC12BLK Use And Care Manual

Assembly

Two people are recommended for assembly.
CAUTION:
1
Attaching the cabinet handle
One handle comes with this cabinet and can be
NOTE:
installed on either the left or right side. If a second
handle is desired, please call 1-888-HD-HUSKY to order.
□
Position the cabinet handle (B) over the holes on the
cabinet (A).
□
Attach with the bolts (CC) and tighten with supplied
hex key
(DD).
The holes in the cabinet are tapped and do not
NOTE:
require nuts.
3
Attaching the storage hook
□
Position the storage hook (E) over the holes on the
cabinet (A).
□
Attach with the bolts (CC) and tighten with supplied
hex key
(DD).
A
CC
B
A
CC
E
2
Attaching the casters
□
Be sure the drawers are locked and lay the cabinet (A)
on its back. Use packaging material to protect the nish.
□
Attach the swivel casters (D) to the unit, on the both end
side of the cabinet (A), inserting bolts (AA) through washer
(BB) and the swivel casters (D) into the cabinet (A).
□
Tighten with supplied hex key (DD) or 12 mm wrench/socket.
□
Repeat this process for the xed casters (C) on the
middle of the cabinet (A).
□
Return the cabinet (A) to its upright position.
Do not over tighten the bolts.
CAUTION:
AA
A
4
Installation of Power Cord
□
BE SURE TO FOLLOW ALL ELECTRICAL SAFETY
PRECAUTIONS.
□
Warning: Do Not forcefully pull on the power
cords to avoid damaging the power strip and
causing injury.
6
D