Assembly - Husky H61MWC15HP Use And Care Manual

Assembly

Two people are recommended for assembly.
CAUTION:
1
Attaching the cabinet handle
One handle comes with this cabinet and can be
NOTE:
installed on either the left or right side. If a second
handle is desired, please call 1-888-HD-HUSKY to order.
□
Position the cabinet handle (B) over the holes on the
cabinet (A).
□
Attach with the bolts (AA) and tighten with supplied
hex key (BB).
The holes in the cabinet are tapped and do not
NOTE:
require nuts.
There are holes to mount handle on both sides
NOTE:
of cabinet, but only one handle is provided.
3
Attaching the bottle opener
□
Position the bottle opener (C) over the holes on the
cabinet (A).
□
Attach with the bolts (AA) and tighten with supplied
hex key (BB).
Do not over tighten the bolts.
CAUTION:
AA
B
A
AA
C
A
after removing the wood pallet and all
CAUTION:
packaging, use the hex key (CC) or a 12mm socket
wrench to tighten all 16 caster bolts, which may have
become loose during shipment.
2
Attaching the storage hook
□
Position the storage hook (D) over the holes on the
cabinet (A).
□
Attach hook (D) using bolts (AA) and tighten with
supplied hex key (BB).
Do not over tighten the bolts.
CAUTION:
A
4
Installation of Power Cord
□
Untie power cord located inside drawer.
□
Gently pull cord plug through grommet.
6
D
AA