Table of Contents
Advertisement
3-3-2 Installing the Memory
Before installing a memory module, make sure to turn off the computer and unplug the power
cord from the power outlet to prevent damage to the memory module.
Be sure to install DDR4 DIMMs on this motherboard.
Follow these instructions to install the Memory:
1.
Insert the DIMM memory module vertically into the DIMM slot, and push it down.
2.
Close the plastic clip at both edges of the DIMM slots to lock the DIMM module.
3.
Reverse the installation steps when you want to remove the DIMM module.
2
Note:
•
DIMM must be populated in sequential alphabetic order, starting with
DIMM2 (DDR4_A2).
•
When only one DIMM is used, it must be populated in memory slot
DIMM2 (DDR4_B2).
Memory Type
Voltage (V)
Connector
Speed (MT/s)
Channels
DIMM Per Channel
DIMM Capacity (GB)
System Hardware Installation
1
DDR4
1.2V
UDIMM
2933
2666
1,2
1,2
2,4,8,16,32
- 25 -
2
Advertisement
Table of Contents
