Advertisement
Advertisement
Table of Contents
Related Manuals for Tool Shed TSAG13
Summary of Contents for Tool Shed TSAG13
- Page 1 ANGLE GRINDER 125MM BACK HAND 1200W TSAG13 www.thetoolshed.co.nz...
-
Page 2: Table Of Contents
PRODUCT DETAILS Product Details ToolShed Angle Grinder 125mm Back Product Model Hand 1200W Specifications Product Identification Product Code TSAG13 Safety Guidelines Operation Maintenance Parts Diagram DISTRIBUTED BY: Thank You Note: For the purchase of this ToolShed product. We try our hardest to supply customers like you This manual is for your reference only. -
Page 3: Specifications
OPERATION MANUAL OPERATION MANUAL SPECIFICATIONS SAFETY GUIDELINES • Dress appropriately. DO NOT wear loose Disk Diameter 125 mm Ø WARNING clothing that can get caught in moving Voltage 230 Volts parts. Keep hair, loose clothing, jewellery, Frequency 50 Hertz and anything else that could be of risk, away READ ALL SAFETY WARNINGS &... - Page 4 OPERATION MANUAL OPERATION MANUAL SAFETY GUIDELINES SAFETY GUIDELINES • Electrical Safety Power Tool & Machinery Use & Service It is recommended as a minimum PPE Care requirement to wear Safety Goggles while • • DO NOT use the power tool or machinery Have your tools and machinery serviced using this grinder.
-
Page 5: Operation
OPERATION MANUAL OPERATION MANUAL OPERATION OPERATION • Multi-Position Handle (Fig. 1) Spindle Lock Button When you have finished using the grinder, WARNING turn the switch to the OFF position. • • Always use the side handle during operation Press the Spindle Lock button on the gear of the grinder to ensure the safest and easiest box, and unscrew the flange with the Flange Before replacing, removing, or... -
Page 6: Maintenance
OPERATION MANUAL OPERATION MANUAL MAINTENANCE PARTS DIAGRAM TSAG13 EXPLODED VIEW & PARTS LIST • Before cleaning or performing any mainte- Outer Flange nance, you must ensure the tool is switched Inner Flange off and disconnected from the power supply. Protect Guard Output Shaft •...
Need help?
Do you have a question about the TSAG13 and is the answer not in the manual?
Questions and answers