Gourmia GJ-1350 - Whole Fruit Extraction Juicer Manual

Gourmia GJ-1350 - Whole Fruit Extraction Juicer Manual

Also See for GJ-1350:

Advertisement

Gourmia GJ-1350 - Whole Fruit Extraction Juicer Manual

KNOW YOUR JUICER

KNOW YOUR JUICER - Part 1

KNOW YOUR JUICER - Part 2

ASSEMBLING YOUR JUICER

  1. Place the base on a steady surface.
  2. Align the black stripe on the spout housing with the black stripe on base and place the spout housing onto the base.
  3. Insert the centrifugal bowl into the spout housing and press down to click it into place.
    ASSEMBLING YOUR JUICER - Step 1
  4. Place the waste container on the side of the juicer with the black stripe.
    ASSEMBLING YOUR JUICER - Step 2
  5. Cover the spout housing and waste container with the juicer cover.
  6. Lift the clamp over the juicer cover and into the grooves, on top of the cover to secure everything into place.
  7. To insert the pusher into the chute, align the groove on the pusher with the notch on the chute and push down.

When using for the first time:

  1. Inspect the appliance and all accessories to ensure that they are intact and there is no product damage. In the event of damage, contact us immediately.
  2. Clean the parts with warm water and soap, and then place them back inside.


The blades are sharp! Use extreme caution when washing.

SELECTING SPEED

  1. Make sure all parts are in their proper place.
  2. Plug the appliance into a wall outlet.
  3. The display will show 3 as the default speed.
  4. Select your desired speed by pressing the +/- buttons on the speed selector.
    Note: See chart for recommended speeds.
  5. Press the power button to start the juicer. Allow the juicer to run with no produce for 5 seconds then press the power button again to stop the juicer.

Press and hold the Pulse button to get an instant burst of speed 4.
Note: The juicer will stop when you release the pulse button.

INSERTING PRODUCE

  1. Insert prepared produce into the chute of the juicer, then insert the pusher and apply slow and even pressure onto the produce

Note: Do not use strong force while pushing down the produce.
Note: Run the juicer for 10 seconds and then allow it to rest for 5 seconds. Repeat this process up to four times. Allow the machine to rest for one minute and then repeat the 10 second operation/5 second break process as many times as desired.

INSERTING PRODUCE

  1. The dial above the juicer spout should be turned to the left so the juice can flow into the pitcher in a full stream.
  2. When finished juicing wait for all the juice to flow out of the juicer before removing the pitcher.
  3. All the waste from the produce will go into the waste container. Remove all waste after each use
SPEED SPEED NAME APPLICABLE FRUIT VEGETABLE ROTATING SPEED
1 Low Grape/Watermelon/Peach 7000
2 Medium Citrus/Orange/Pear 8800
3 High Pinapple/Cantaloupe 10,200
4 Extra Boost Apple/Ginger/Hard Vegetable 12000

CLEANING AND MAINTENANCE

  • Always remove the plug from the outlet and allow the appliance to cool before cleaning.
  • Do not immerse the Juicer base into water or any other liquid.
  • The blades are sharp! Use extreme caution when washing.
  1. Clean the parts after each use using warm water and soap.
  2. Wipe down the base and clamp using a soft, damp cloth to remove any stains.
    CLEANING AND MAINTENANCE

NOTE: Do not use abrasive cleansers.

IMPORTANT SAFEGUARDS

Read all safety and usage instructions before using.

  1. This unit features a safety feature which will not allow the motor to run if any components are not properly secured. Ensure that it is assembled correctly per the included diagrams and directions.
  2. For adult use only; never leave unattended children near an appliance while it is connected to a power supply.
  3. This machine should only be used for its intended purpose and in a residential setting.
  4. In the event of damage to the cord, contact a qualified electrician or service provider.
  5. Store the machine in a dry and well-ventilated area
  6. Never immerse the main electrical unit in water. To clean, wipe down with a damp cloth and mild detergent. All other components can be washed with warm soapy water.
  7. Ensure that the base is on a smooth, stable and even surface.
  8. During juicing, ensure that the rotor and waste container don't have too much of a buildup. In the event that they do, clean them before continuing use.
  9. While in use, keep all body parts and foreign objects away from the chute to avoid accidental damage and injuries.
  10. In order to prolong its life, this unit features an over-heating protection system. If the motor is running for too long and at risk of over-heating, power supply is automatically cut off. Should this occur, allow the motor to cool for approximately ½ hour before resuming use.
  11. Do not remove the juice from the unit until it is disconnected from its power supply.
  12. The blades are sharp! Use extreme caution when washing.

Documents / Resources

Download manual

Here you can download full pdf version of manual, it may contain additional safety instructions, warranty information, FCC rules, etc.

Download Gourmia GJ-1350 - Whole Fruit Extraction Juicer Manual

Advertisement

Need help?

Need help?

Do you have a question about the GJ-1350 and is the answer not in the manual?

Questions and answers

Table of Contents