Toro Z Master 74927 Operator's Manual page 49

Figure 77
1. Clutch pulley
2. Mower belt
3. Spring loaded idler pulley
4. Ratchet
10. Install the belt guide on the idler arm shown in
Figure 77.
11. Using the ratchet in the square hole, install the idler
spring (Figure 77).
Make sure the spring ends are seated in the anchor
grooves.
12. Install the belt covers (Figure 78).
5. Square hole in the idler
arm for the ratchet
6. Idler grease zerk
7. Belt guide
1. Position the belt cover
2. Slide belt cover under the
side catches
49
Figure 78
3. Ensure the tab is under
the metal catch