Related Manuals for Go 2057T
Summary of Contents for Go 2057T
- Page 1 Mar-18 Product Code: 2057T OWNER’S MANUAL PRODUCT CODE: 2057T 1,000kg TRANSMISSION LIFTER Maximum Minimum Maximum Tilt Lateral Tilt Back Weight Capacity Height Height Forward Adjustment 1,000kg 230mm 760mm 70˚ 15˚ 90mm 57kg...
-
Page 2: Table Of Contents
Mar-18 Product Code: 2057T WARNING IMPORTANT: READ ALL INSTRUCTIONS BEFORE USE WARNING The instructions and warnings contained in this manual should be read and understood before using or operating this equipment. Do not allow anyone to use or operate this equipment until they have read this manual and have developed a thorough understanding of how this equipment works. -
Page 3: Safety Instructions
Mar-18 Product Code: 2057T SAFETY INSTRUCTIONS SAFETY OPERATING INSTRUCTIONS Save these instructions. For your safety, read, understand, and follow the information provided with and on this 1,000kg Transmission Lifter before using. DO NOT exceed the maximum lifting load capacity of 1000kg. -
Page 4: Assembly, Operation, Preventitive Maintenance
Mar-18 Product Code: 2057T ASSEMBLY, OPERATION, PREVENTITIVE MAINTENANCE 1. FEATURES This professional TradeQuip "Made for the Trade” 1,000kg Hydraulic Low Profile Transmission Jack is perfect for transmission installation and removal. Features smooth, manually operated hydraulic lifting and lowering and a 360° rotating handle for better load positioning. - Page 5 Mar-18 Product Code: 2057T Continue raising the saddle up to the transmission to determine where you will need to adjust the supports. All four supports need to grip and make contact with the transmission. After determining where they need to be set, loosen the threaded bolts on each support, and adjust it to the proper setting for the transmission.
- Page 6 Mar-18 Product Code: 2057T 5. MAINTENANCE Replace or repair damaged parts. Use recommended parts only. Non authorised parts may be dangerous and will invalidate the warranty. Changing the Hydraulic Oil Change the hydraulic jack oil at least once a year.
-
Page 7: Parts Diagram
Mar-18 Product Code: 2057T PARTS DIAGRAM Page | 7... -
Page 8: Parts List
Mar-18 Product Code: 2057T PARTS LIST Page | 8... - Page 9 Mar-18 Product Code: 2057T TROUBLESHOOTING PROBLEM POSSIBLE CAUSE ACTION Lifter does not operate when 1. Release valve not closed 1. Firmly close the release handle is pumped tightly. valve. 2. The steel ball is immersed 2. Open the release valve by inside for too long.
-
Page 10: Warranty
Mar-18 Product Code: 2057T WARRANTY TradeQuip products have been carefully tested and inspected before shipment and are guaranteed to be free from defective materials and workmanship for a period of 12 months from the date of purchase except where tools are hired out when the guarantee period is ninety days from the date of purchase.
Need help?
Do you have a question about the 2057T and is the answer not in the manual?
Questions and answers