Related Manuals for Go 2081
Summary of Contents for Go 2081
- Page 1 Product Code: 2081 OWNER’S MANUAL PRODUCT CODE: 2081 1,000kg TRANSMISSION LIFTER Maximum Minimum Maximum Tilt Tilt Back Tilt Right Tilt Left Capacity Height Height Forward 1,000kg 175mm 805mm 70˚ 15˚ 25˚ 15˚...
-
Page 2: Table Of Contents
Product Code: 2081 WARNING IMPORTANT: READ ALL INSTRUCTIONS BEFORE USE WARNING The instructions and warnings contained in this manual should be read and understood before using or operating this equipment. Do not allow anyone to use or operate this equipment until they have read this manual and have developed a thorough understanding of how this equipment works. -
Page 3: Safety Instructions
Product Code: 2081 SAFETY INSTRUCTIONS SAFETY OPERATING INSTRUCTIONS Save these instructions. For your safety, read, understand, and follow the information provided with and on this 1,000kg Transmission Lifter before using. DO NOT exceed the maximum lifting load capacity of 1000kg. -
Page 4: Assembly, Operation, Preventitive Maintenance
Product Code: 2081 ASSEMBLY, OPERATION, PREVENTITIVE MAINTENANCE 1. FEATURES The Red Label wide chassis floor-style Transmission Lifter features a wide chassis, fully adjustable tilt saddle, four easy-roll castors and a swivel pump handle that can be positioned in tight spots. The wide chassis allows for load distribution and stability, and has an adjustable tilt saddle. - Page 5 Product Code: 2081 10. Raise the unit again to make contact with the transmission, making sure all of the supports are in firm contact. 11. Wrap the chain securely around the transmission, and hook the chain to the bracket on the other side of the saddle.
- Page 6 Product Code: 2081 5. MAINTENANCE Replace or repair damaged parts. Use recommended parts only. Non authorised parts may be dangerous and will invalidate the warranty. Changing the Hydraulic Oil Change the hydraulic jack oil at least once a year. Fully lower the transmission lifter, remove the oil fill plug on the side of the hydraulic ram.
-
Page 7: Parts Diagram
Product Code: 2081 PARTS DIAGRAM Page | 7... -
Page 8: Parts List
Product Code: 2081 PARTS LIST Part Description Part Description Main Frame Forward Tilt Knob Lift Arm Spring Pin Lift Arm Strap Forward Pivot Front Front Link Washer Snap Ring Forward Pivot Back Side Tilt Knob Bearing Spacer Lock Nut Side Pivot/Front... - Page 9 Product Code: 2081 TROUBLESHOOTING PROBLEM POSSIBLE CAUSE ACTION Lifter does not operate when 1. Release valve not closed 1. Firmly close the release handle is pumped tightly. valve. 2. The steel ball is immersed 2. Open the release valve by inside for too long.
-
Page 10: Warranty
Product Code: 2081 WARRANTY TradeQuip products have been carefully tested and inspected before shipment and are guaranteed to be free from defective materials and workmanship for a period of 12 months from the date of purchase except where tools are hired out when the guarantee period is ninety days from the date of purchase.
Need help?
Do you have a question about the 2081 and is the answer not in the manual?
Questions and answers