Planet Networking & Communication IKVM-210 M Series User Manual page 16

IKVM-210 M Series Rear Panels
Interface
Power Jack
USB Port
Computer Port
Port Select Panel
Interface
Online
Select
RST
ENT
The input power is 12V DC.
Use the power adapter included in the package; otherwise, it may
damage the unit and result in danger.
Plug external USB keyboard and mouse into this port.
Install the KVM cable connected to a PC here.
If a corresponding LED number is on, it means the port is online. Otherwise, the
port is off.
The selected port number will display here in segment display.
Detect the PS2/USB signal of port again.
User can select by pressing the number buttons and press "ENT" to confirm,
then it will switch to the corresponding port. If that port is offline or the wrong
number is pressed which is not included in display scope, there will be no
response, but just keep the present status.
16
-
8-/16-port Combo LCD KVM Switch
Description
Description
-
IKVM/KVM-210 M Series