Summary of Contents for Planet Networking & Communication IKVM-210 M Series
- Page 1 8-/16-port Combo LCD KVM Switch IKVM/KVM-210 M Series 8-/16-port Combo LCD KVM 8-/16-port Combo IP LCD KVM IKVM/KVM-210 M Series...
- Page 2 8-/16-port Combo LCD KVM Switch IKVM/KVM-210 M Series Copyright Copyright 2017 by PLANET Technology Corp. All rights reserved. No part of this publication may be reproduced, transmitted, transcribed, stored in a retrieval system, or translated into any language or computer language, in any form or by any means, electronic, mechanical, magnetic, optical, chemical, manual or otherwise, without the prior written permission of PLANET.
- Page 3 8-/16-port Combo LCD KVM Switch IKVM/KVM-210 M Series (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Federal Communication Commission (FCC) Radiation Exposure Statement This equipment complies with FCC radiation exposure set forth for an uncontrolled environment. In order to avoid the possibility of exceeding the FCC radio frequency exposure limits, human proximity to the antenna shall not be less than 20 cm (8 inches) during normal operation.
-
Page 4: Table Of Contents
8-/16-port Combo LCD KVM Switch IKVM/KVM-210 M Series Table of Contents Chapter 1. Product Introduction ....................... 5 Package Contents ........................5 Overview ..........................6 Features ..........................10 Specifications ......................... 11 Chapter 2. Hardware Interface ......................15 Physical Descriptions ......................15 Hardware Installation ......................18 Chapter 3. -
Page 5: Chapter 1. Product Introduction
8-/16-port Combo LCD KVM Switch IKVM/KVM-210 M Series Chapter 1. Product Introduction 1.1 Package Contents The package should contain the following: Combo LCD KVM Switch x 1 Quick Guide x 1 IP installation Guide x 1 (For IKVM Series) ... -
Page 6: Overview
8-/16-port Combo LCD KVM Switch IKVM/KVM-210 M Series 1.2 Overview Easy Switching, Efficient Management PLANET KVM-210-08M/16M Combo VGA LCD KVM Switch features an integrated 17" LED-backlit LCD panel allowing access to and control up to 8/16 computers from a single console (keyboard, mouse and monitor). - Page 7 8-/16-port Combo LCD KVM Switch IKVM/KVM-210 M Series Multiple Operating Systems Supported (For IKVM Series) The IKVM-210-08M/16M is the most cost-effective and simple solution for controlling a group of PCs in the network. Multiple computers can be managed via only one single set of monitor, keyboard and mouse directly.
- Page 8 8-/16-port Combo LCD KVM Switch IKVM/KVM-210 M Series client, you could use these key combinations to control these local PCs with a different OS via the internet. Computer Switching There are three convenient methods to access any computer connected to the installation: ...
- Page 9 8-/16-port Combo LCD KVM Switch IKVM/KVM-210 M Series Powerful Mouse/Keyboard Support In the present computer applications, a mouse has become an indispensable device. The IKVM/KVM-210 Series fully supports all models of PS/2 mice on the market. The KVM also supports the PS/2 keyboard port of code set 1/2/3 and further allows you to use the KVM for all kinds of servers, computers or their combination.
-
Page 10: Features
8-/16-port Combo LCD KVM Switch IKVM/KVM-210 M Series 1.3 Features Hardware ■ Integrated 17” LCD monitor and keyboard/touchpad module within 1U chassis ■ Standalone machine controls up to 8/16 sets of computers ■ Up to 2 levels can be cascaded and up to 64/256 computers can be controlled ■... -
Page 11: Specifications
8-/16-port Combo LCD KVM Switch IKVM/KVM-210 M Series 1.4 Specifications KVM-210 M Series Specifications Product KVM-210-08M KVM-210-16M Hardware Number of Ports 8 D-sub ports (15-pin) 16 D-sub ports (15-pin) 64 by 2-tier star-type 256 by 2-tier star-type Maximum cascading cascading (KVM-210-08 x 8) (KVM-210-16 x 16) Keyboard... - Page 12 8-/16-port Combo LCD KVM Switch IKVM/KVM-210 M Series Hotkeys on keyboard OSD (on screen display) Scan Interval 5~60 seconds Security User password and super password Environment & Certification Operating Temperature 0 ~ 50 degrees C Operating Humidity 0 ~ 90% Regulatory CE, FCC...
- Page 13 8-/16-port Combo LCD KVM Switch IKVM/KVM-210 M Series IKVM-210 M Series Specifications Product IKVM-210-08M IKVM-210-16M Hardware Number of Ports 8 D-sub ports (15-pin) 16 D-sub ports (15-pin) 64 by 2-tier star-type 256 by 2-tier star-type Maximum cascading cascading (KVM-210-08 x 8)
- Page 14 8-/16-port Combo LCD KVM Switch IKVM/KVM-210 M Series Management Supported Protocol TCP, IP, HTTP Client Software IPKVM Software Port select button PC Selection Hotkeys on keyboard OSD (on screen display) Scan Interval 5~60 seconds User password and super password Security DES, AES and 3DES Environment &...
-
Page 15: Chapter 2. Hardware Interface
8-/16-port Combo LCD KVM Switch IKVM/KVM-210 M Series Chapter 2. Hardware Interface 2.1 Physical Descriptions Control Platform Component Function Description 17" LCD screen Port Select Panel Switch the Port Number and display the online port Touchpad Mouse Operation Keyboard Keyboard Operation Slide Rail Single Slide Rail 8-/16-port KVM... - Page 16 8-/16-port Combo LCD KVM Switch IKVM/KVM-210 M Series IKVM-210 M Series Rear Panels Interface Description The input power is 12V DC. Power Jack Use the power adapter included in the package; otherwise, it may damage the unit and result in danger.
- Page 17 8-/16-port Combo LCD KVM Switch IKVM/KVM-210 M Series IP Module Interface Description LAN Port One 10/100/1000BASE-T RJ45 auto-MDI/MDI-X port. Reboot Press and release to restart the system. Reset Press for 5 seconds to reset to default.
-
Page 18: Hardware Installation
8-/16-port Combo LCD KVM Switch IKVM/KVM-210 M Series 2.2 Hardware Installation The LCD KVM provides a standard 19-inch rack for the installation of devices. Please use the rack installation accessories attached with the product package. First install the accessories to the device and then the device to the rack. - Page 19 8-/16-port Combo LCD KVM Switch IKVM/KVM-210 M Series Step 3. Slide the rear attachment sliding brackets along the slide bars until they contact the rear of the switch. Step 4. Use the screws supplied with this package to attach the bars to the rear of the switch. Step 5.
- Page 20 8-/16-port Combo LCD KVM Switch IKVM/KVM-210 M Series Step 6. Attach the power supply to the KVM unit and plug the other end into an electrical receptacle. Now you will see the LED for Port 1 light up. Switch on your monitor from the Port Select button.
-
Page 21: Chapter 3. Operations
8-/16-port Combo LCD KVM Switch IKVM/KVM-210 M Series Chapter 3. Operations There are three ways to switch PC. Please see the operation instructions below for more understanding. 3.1 Manual Key You just need to press the Port Select Button on the front panel of the KVM. The Selection LED (Green) is on, indicating that you are switching to the corresponding port. - Page 22 8-/16-port Combo LCD KVM Switch IKVM/KVM-210 M Series Ctrl + Ctrl (Default setting) Scroll + Scroll Alt + Alt Shift + Shift Parameters Description This column lists the port numbers for all the CPU ports on the installation. The simplest method to access a particular computer is to move the highlight bar to it, and then press [Enter].
-
Page 23: Goto
8-/16-port Combo LCD KVM Switch IKVM/KVM-210 M Series 3.3.1 GOTO GOTO allows you to switch directly to a port either by keying in the port’s name or its port number. NAME: Move highlight bar to “NAME”, press [Enter], input name of a port, and then press [Enter] to confirm. -
Page 24: List
8-/16-port Combo LCD KVM Switch IKVM/KVM-210 M Series 3.3.3 LIST The LIST function lets you broaden or narrow the scope of which port the OSD displays on the main screen. Parameters Description Lists all of the ports on the installation. Lists only the ports that have been selected as Quick View Ports. -
Page 25: Qv (Quick View)
8-/16-port Combo LCD KVM Switch IKVM/KVM-210 M Series 3.3.4 QV (Quick View) QV function can select port as Quick View. Move the highlight bar to a port and press [F4] to enable an icon of “up triangle” to appear. Press [F4] again and the icon disappears. 3.3.5 EDIT EDIT function creates or edits the name of a port. -
Page 26: Set
8-/16-port Combo LCD KVM Switch IKVM/KVM-210 M Series 3.3.6 SET SET function configures the OSD menu. Move the highlight bar to an option, and press [Enter] to enter a setting option. Parameters Description OSD ACTIVATING Select OSD activating hotkey. HOTKEY Select the switch hotkey to switch PC. - Page 27 8-/16-port Combo LCD KVM Switch IKVM/KVM-210 M Series Parameters Description Set new password. The password permission is for administrator. First enter old password, then enter new password and confirm it. SET SUPER PASSWORD The new password is set. If error occurs, the screen will remind users.
-
Page 28: Chapter 4. Ipkvm Software (For Ikvm Series)
8-/16-port Combo LCD KVM Switch IKVM/KVM-210 M Series Chapter 4. IPKVM Software (For IKVM Series) PLANET IKVM Series provides an IPKVM utility to remotely control the server. 4.1 System Requirements The following are required for further management: CPU: Intel Dual Core 2.0GHz or higher RAM: 2GB or above recommended 128MB or above recommended... - Page 29 8-/16-port Combo LCD KVM Switch IKVM/KVM-210 M Series Step 2. Once the Setup program starts running, please click the “Next” button for starting installation. Step 3. Click “Install” for starting installation.
- Page 30 8-/16-port Combo LCD KVM Switch IKVM/KVM-210 M Series Step 4. Click the “Finish” button for completing the IPKVM Setup. Please do not disable the Launch IPKVM. The IKVM needs registry to initiate the IPKVM software to enable to remotely control PC.
-
Page 31: Chapter 5. Web-Based Management (For Ikvm Series)
8-/16-port Combo LCD KVM Switch IKVM/KVM-210 M Series Chapter 5. Web-based Management (For IKVM Series) This section provides instructions about how to use the web interface to configure and control the PC remotely. 5.1 Mouse settings A different OS has a different mouse setting. Please refer to the steps below to set the mouse setting of PC before logging to Web. - Page 32 8-/16-port Combo LCD KVM Switch IKVM/KVM-210 M Series Set the mouse motion speed setting to exactly the middle speed. Disable the "Enhanced pointer precision" option. Click OK. Windows 2000 Settings To configure KVM target servers running Microsoft Windows 2000 operating system: Choose Start >...
- Page 33 8-/16-port Combo LCD KVM Switch IKVM/KVM-210 M Series Save the file. iii. Reboot the system in order for the changes to take effect. Linux Settings (for Standard Mouse Mode) To configure KVM target servers running Linux (graphical user interface): Red Hat 5 users, choose Main Menu > Preferences > Mouse, Red Hat 4 users, choose System >...
- Page 34 8-/16-port Combo LCD KVM Switch IKVM/KVM-210 M Series iii. Choose Mouse Style Manager. The Style Manager - Mouse dialog appears. Set the Acceleration slider to 1.0. Set the Threshold slider to 1.0. Click OK. IBM AIX 5.3 Settings Follow these steps to configure KVM target servers running IBM. AIX. 5.3. To configure the mouse Go to Launcher Choose Style Manager.
-
Page 35: Network Connection
8-/16-port Combo LCD KVM Switch IKVM/KVM-210 M Series 5.2 Network connection Step 1. Connect manager PC to RJ45 LAN port to enable to remotely manage a PC. The default IP address of the IKVM-210 Series is 192.168.0.10, then the manager PC should be set to 192.168.0.x (where x is a number between 1 and 254, except 10), and the default subnet mask is 255.255.255.0. -
Page 36: Web Managenent
8-/16-port Combo LCD KVM Switch IKVM/KVM-210 M Series Step 3. If you cannot login the web, please use PLANET Smart Discovery Lite to search IKVM Series. 5.3 Web Management 5.3.1 Console The Console is the redirected screen, keyboard and mouse of the remote host system that IP-KVM controls. - Page 37 8-/16-port Combo LCD KVM Switch IKVM/KVM-210 M Series Parameters Description Open the remote console to control PC. Client When you click “Client” and link the IPKVM.exe, then open the remote console. Please see the picture below for more understanding.
-
Page 38: User
8-/16-port Combo LCD KVM Switch IKVM/KVM-210 M Series Parameters Description Press the Full Screen to make display in full screen. Full Screen After login, system will automatically calibrate mouse. If it fails, please click Align Mouse on the left to operate manually. A different OS has a different mouse setting. -
Page 39: Log
8-/16-port Combo LCD KVM Switch IKVM/KVM-210 M Series Parameters Description Super With all the permissions of setting operation Administrator Can edit the Console option setting of authorization Can add, delete, modify the user rights of the user operation; you can Administrator edit the level of user-related settings Can do the relevant inquiries of Log part. - Page 40 8-/16-port Combo LCD KVM Switch IKVM/KVM-210 M Series Parameters Description Display the Ethernet MAC address of the device. Note that user cannot change it. Encrypt DES, AES and 3DES. This address is a unique number that identifies a computer or device on the WAN or LAN.
-
Page 41: System
8-/16-port Combo LCD KVM Switch IKVM/KVM-210 M Series 5.3.5 System Parameters Description Version This information shows the software version in the device. Displays the date and time of the device. Device Daytime Set Device Daytime Click this option to set time and date manually. Restart The device is restarted without changing any of the settings. -
Page 42: Appendix A: Frequently Asked Questions
8-/16-port Combo LCD KVM Switch IKVM/KVM-210 M Series Appendix A: Frequently Asked Questions Q1. [KVM-210-08/KVM-210-16] What should we do if the keyboard/mouse has no response? Step 1. Reinstall the keyboard/mouse by unplugging the keyboard/mouse from the control end and then plugging it back. - Page 43 8-/16-port Combo LCD KVM Switch IKVM/KVM-210 M Series Replace the VGA cable with the one that is appropriately short. Q5. [IKVM-210-08/IKVM-210-16] Why does the remote console cannot display the screen at Full HD? Please check the settings below to solve this issue: Please check whether the cable from the switch to the computer is properly connected.