6
www.home-comfort.com
Built in Wi-Fi and Bluetooth: allows you to
control the convector from your mobile device
via the dedicated app.
7
Fig. 2 Control panel
1. Device On/Off button
2. Button for turning on/off the open window
function
3. Button for activating Auto heating mode,
switching between Comfort, Eco, Anti-Frost
modes.
4. Button for turning on the Manual heating
mode, selecting the heating power level
from 1 to 10.
5. Button to increase target temperature.
6. Button for decreasing the target
temperature value
7. LED display
Indicators designation on LED
display
1
2
11
10
9
1. Wi-Fi connection status.
2. Open window function indication.
3. Timer off function indication (to turn off).
4. Schedule display.
5. AUTO heating mode indication.
6. Scale of heating power levels.
7. Heating mode indication MANUAL (user
mode).
8. Indication of the convector operation:
- Illuminated red - convector is on;
- Not lit - the convector is off.
9. Indication of the current heating mode:
- Comfort - orange;
- Eco - green;
2
1
4
M
5 6
3
3
4 5
A
6
M
8
7
- Anti-frost - blue.
10. Indication of the power limit function.
11. Display of target temperature and errors.
Turning on the device
Press the on / off button
order to put the device into working mode.
Press the button
to turn on the device.
The factory set temperature is +24 ºС.
Operating modes and functions
There are 3 temperature operating modes
available for adjustment:
Comfort - range from 10 ºC to 35 ºC.
Eco - deviation range from Comfort from 3 ºC
to 7 ºC.
Anti-Frost - a range from 3 ºC to 7 ºC.
Heating power modes
Auto - the heating element is inversely
controlled.
Manual - the user himself limits the maximum
power of the heating element. A choice of 10
power levels.
Consumption limitation
Power limitation of consumption up to 50% is
only available in automatic operating mode.
To activate/deactivate power limitation the
power consumption at the same time press
the buttons
for 2 seconds.
The limit icon will light up.
Control the target heating
temperature
•
Use the button to increase the target
temperature value
•
To decrease the value of the target
temperature use the button
The switching step is 1 degree.
Setting the operation mode
Press the button
for 2 seconds to switch on
the automatic mode. The icon «A» will light up.
Press the button
once to switch between
the heating modes.
The modes are switched in the following orde:
•
Comfort - orange;
of the heater in
.