View Timer - Sharp 32NS350 Operating Manual

Parent Control (VIEW TIMER Continued)
9
Enter the 4-digit SECRET No. using the REMOTE KEYPAD .
10
Press MENU , and SECRET No. is registered.
Example:
• To restrict anybody from watching the TV for 5 hours, after
watching the TV for 2 hours, your settings would look like this:
• They can choose to watch the 2 hours of TV however they wish.
For example, they could watch 1 hour of TV, turn TV off for 30
minutes, then turn TV on and watch the remaining 1 hour on the
VIEWING TIMER.
L To change the VIEW TIMER settings. (SECRET No. is registered)
1
Repeat "How to set VIEW TIMER" steps and select
"PARENT CONTROL VIEW TIMER" during step
3. Press VOL (+) or (–) , and "INPUT SECRET No."
will be displayed.
2
Enter the 4-digit SECRET No. using the REMOTE
KEYPAD , and the VIEW TIMER access screen
will be displayed. Repeat step 5 - 6.
NOTE:
• When you choose the correct SECRET No., the VIEW TIMER
access screen is displayed. If the wrong SECRET No. is chosen,
"SECRET No. IS INCORRECT" is displayed. Input the SECRET
No. again in this case.
L
To cancel the VIEW TIMER (While the TV set is OFF but the
VIEW TIMER is set)
1
Turn on TV; a blue screen message "TIME OVER" will appear. If
you do nothing, the TV will turn off in approximately 30 seconds.
2
Enter the 4-digit SECRET No. using the REMOTE
KEYPAD . When you choose the correct
SECRET No., the VIEW TIMER is canceled. If
the wrong SECRET No. is chosen, "SECRET
No. IS INCORRECT" is displayed. Input the
SECRET No. again in this case.
L To cancel the VIEW TIMER setting or change the SECRET
No. (When you forget the SECRET No.)
1
Repeat "How to set VIEW TIMER" steps and
select "PARENT CONTROL VIEW TIMER" during
step 3. Press VOL (+) or (–) , and "INPUT SECRET
No." will be displayed.
24
19-25 32N-S350 24 5/25/00, 1:15 PM