Philips 65OLED935/43 User Manual page 16

Table of Contents

1 - Plug in the power plug to start the installation and

select language and country. You can skip the

channel search. Finish the installation.

2 - Plug in the USB flash drive that holds the channel

list of the other TV.

3 - To start the channel list upload, select Settings

> Channels > Channel List Copy > Copy to TV and

press OK. Enter your PIN code if necessary.

4 - The TV notifies you if the channel list is copied to

the TV successfully. Unplug the USB flash drive.

To Installed TVs

Depending on whether your TV is already installed or

not, you must use a different method to upload a

channel list.

To an already installed TV

1 - Verify the country setting of the TV. (To verify this

setting, see chapter Reinstall All Channels. Start this

procedure until you reach the country setting.

Press  BACK to cancel the installation.)

If the country is correct continue with step 2.

If the country is not correct, you need to start a

reinstallation. See chapter Reinstall All Channels and

start the installation. Select the correct country and

skip the channels search. Finish the installation. When

done, continue with step 2.