Table of Contents
Advertisement
Quick Links
Technical Support and E-Warranty Certificate www.vevor.com/support
VS5425 VACUUM SEALER
INSTRUCTIONS
We continue to be committed to provide you tools with competitive price.
"Save Half", "Half Price" or any other similar expressions used by us only represents an
estimate of savings you might benefit from buying certain tools with us compared to the major
top brands and doses not necessarily mean to cover all categories of tools offered by us. You
are kindly reminded to verify carefully when you are placing an order with us if you are
actually saving half in comparison with the top major brands.
Advertisement
Table of Contents
Related Manuals for VEVOR VS5425
Summary of Contents for VEVOR VS5425
- Page 1 Technical Support and E-Warranty Certificate www.vevor.com/support VS5425 VACUUM SEALER INSTRUCTIONS We continue to be committed to provide you tools with competitive price. "Save Half", "Half Price" or any other similar expressions used by us only represents an estimate of savings you might benefit from buying certain tools with us compared to the major top brands and doses not necessarily mean to cover all categories of tools offered by us.
- Page 3 CustomerService@vevor.com This is the original instruction, please read all manual instructions carefully before operating. VEVOR reserves a clear interpretation of our user manual. The appearance of the product shall be subject to the product you received. Please forgive us that we won't inform you again if...
-
Page 5: Important Safeguards
I tem Part Name BOTTOM HOUSING ASSY POWER PCB CONTROL PCB JAR PORT ASSY TOP HOUSING ASSY SEALING PROFILE GASKET KNIFE MOUNT ASSY BACK COVER ASSY HEATER ASSY TOP COVER ASSY MOTOR PUMP ASSY SIDE DOOR LEFT AXES RIGHT AXES IMPORTANT SAFEGUARDS When using this electrical appliance, safety precautions should always be observed, including the following:... - Page 6 professional. Keep away from moving parts. Do not contact the hot sealing element located on edge of the top cover of this machine. It is hot and may get burn. Do not try to repair this appliance by yourself. Don't use the appliance if it has fallen or appeared to be damaged. 10.
-
Page 7: Construction And Functions
CAUTION: SAVE THESE INSTRUCTIONS FOR HOUSEHOLD USE ONLY AB:1MIN PER CYCLE CONSTRUCTION AND FUNCTIONS 1.Vacuum&seal / Cancel: This button has two functions depending on the machine status: At stand-by condition, it starts the automatic operation of vacuuming the bag and then automatically seals the bag when vacuum is complete;... - Page 8 To start vacuuming for canisters, jar lids, wine stoppers or other accessories through a hose. 5.Marinate: Press to marinate food with the marinator bowl.
- Page 9 6.Manual Seal: This button provides two functions: To seal the open end of a bag without vacuuming air suction, used to make a bag from a bag roll; When the automatic “Vacuum &seal” function is in operation, this button stops the motor pump and immediately starts to seal the bag so that less vacuum pressure inside the bag can be controlled by the operator to avoid crushing for delicate items.
- Page 10 9. LED Indicators: Indicates the status of vacuum or seal process, and the status of the machine settings. 10. Hose port: To insert the hose for canister and wine stopper before “marinates” or “canister” operations. 11. Front handle: Press down to lock the cover. And lift to open the cover. 12.
- Page 11 18. Bag Cutter: Press and slide in one direction or another to cut bags to a desired size. 19. Cutter rack: Support the cutter to slide along OPERATING INSTRUCTIONS Making a bag with bag roll 1. Plug the unit into a power source;Turn switch to "Ⅰ". 2.
- Page 12 5.Put down the cutter rack and make sure it is on the right place of the bags, then slide the cutter from one end to the other end to cut the bag– Fig.3 Fig.3 Put one end of the bag on top of the sealing strip, but not enter the vacuum chamber– Fig.4 Fig.4 Close the upper lid and press tightly till you hear it click in place on both sides–...
-
Page 13: Vacuum Packaging With A Bag
9. Lift the front handle to open the cover and take the bag out of the machine. The bag is then done and is ready for vacuum sealing -Fig.7 Fig.7 II. Vacuum packaging with a bag 1. Put the items inside the bag. Use only the special designed vacuum bags supplied by us with vacuum channels. - Page 14 Check the LED status of “vacuum” and the “sealing time” to confirm sealing time depending on the moisture status of packed items (extended/moist/dry) and desired vacuum pressure (Normal/Gentle) according to the type of food; Then press Vacuum & Seal button, the unit start to vacuum and will seal the bag automatically - Fig 3 Fig.3 NOTE: This product provides very high vacuum pressure during vacuum packaging with a...
- Page 15 Cut the bag straight across with scissors to open a sealed bag. III. Vacuum package in a Canister & Vacuum Bowl 1.Wipe canister cover, canister base and ensure they are clean and dry. 2.Put the items into the canister and do not fill up too full so that the cover can be in good contact with the canister bowl rim.
- Page 16 Open Canister after vacuum packaging In order to open the canister, you need to press the “Release “button on the canister cover. Ⅳ. Marinate meat with a marinate Bowl Take out the hose accessory from inside cover, insert it to canister port on unit and the center hole of canister cover–...
-
Page 17: Storing Your Vacuum Sealer
GENERAL SAFETY AND ACCIDENT PREVENTION Do not touch the machine with wet hands. Do not touch the machine when barefoot. In case of breakdown or malfunction, switch off the machine and unplug it. Do not leave the machine exposed to athmospheric agents & put it in water. - Page 18 See if electrical outlet is operative by plugging in another appliance. 5. Twist the Fuse Cap off, then look at the clear tube to see if the Fuse is darkened. If the Fuse is darkened, it will need to be replaced with a standard 10-amp Buss Fuse. 6.
-
Page 19: Disposal Of The Device
Air has re-entered into the bag after being sealed. Leaks along the seal which can be caused by wrinkles, debris crumbs, grease or liquids. Reopen bag, wipe the top inside of the bag and smooth it out along the sealing strip before resealing. - Page 20 ENVIRONMENT PROTECTION FIRST The symbol on the product or on its packaging indicates that this product may not be treated as household waste. Instead it should be handed over to the applicable. Collection point for the recycling of electrical and electronic equipment. 2.
- Page 21 colored marking identifying the terminals in your plug, proceed as follows: ·the wire which is colored BLUE must be connected to the terminal which is marked with the letter “N” or colored BLACK ·the wire which is colored BROWN must be connected to the terminal which is marked with the letter “L”...
- Page 24 Technical Support and E-Warranty Certificate www.vevor.com/support...
Need help?
Do you have a question about the VS5425 and is the answer not in the manual?
Questions and answers
My vacuum sealer will not seal a bag. It will vacuum it but the element doesn’t get hot to seal the bag.
The VEVOR VS5425 vacuum sealer may not seal bags despite vacuuming due to the following reasons:
1. Vacuum Pressure Sensor Issue: The vacuum pressure inside the bag may not be reaching the predetermined level. Check the sealing strip and foam gasket beneath the lid for debris or misalignment. Clean and adjust them as needed.
2. Foam Gasket Issues: There might be breaking or distortion in the foam gaskets on the cover or base. Remove the gasket, wash, dry, and replace it properly, or get a new gasket if necessary.
3. Leaky Bag: The vacuum bag may have a leak. Test the bag by sealing it with air inside, submerging it in water, and applying pressure. If bubbles appear, the bag has a leak. Reseal or use a new bag.
4. Seal Leaks: Wrinkles, debris, crumbs, grease, or liquids along the bag's sealing area can cause leaks. Open the bag, clean the top inside, smooth it out along the sealing strip, and reseal.
Address these factors to resolve the issue.
This answer is automatically generated