Audio Connections; Connecting To The Digital Audio Terminal - Sharp BD-HP16U Operation Manual

Audio Connections

Connecting to the Digital Audio Terminal

• You can connect audio equipment to the DIGITAL AUDIO OUT terminal.
• See page 44 for information on the output of next generation audio formats.
STEPS
1 Be sure to turn off this Player and the equipment before making any connections.
Firmly connect an optical digital cable (commercially available) to the optical digital audio terminals (1 and 2).
2
Audio equipment with a digital audio input terminal
After connecting
• Load a disc and start playback. (Pages 24–28)
This Player
Optical digital cable
(commercially available)
TV
• When using OPTICAL output,
5.1 ch Digital Output is available.
7.1 ch Digital Output is not available.
NOTE:
7.1 ch Audio is available via the HDMI terminal.
To OPTICAL
1
terminal
To OPTICAL 2
input terminal
Amplifier
17