Automatic Tuning - Toshiba HDR5010 Owner's Manual

1. Ensure the aerial is plugged into this unit.
2. Once the unit has powered up for the first time, the following menu is displayed. Press
the [oK] button to continue.
note:
• On initial startup there is also an option available to access advanced setup by pressing the [RED] button
before tuning starts. Press the [BACK] button to return to the tuning screen.
3. The Digital TV recorder will now scan and store all available channels. Depending on the
quality of your reception, this may take several minutes. Please be patient and do not
press any buttons.
note:
• If no channels are found, a message is displayed asking you to check your aerial. Confirm that your aerial is
connected correctly and press the [oK] button to restart automatically tuning.
4. Once automatic tuning has finished, you may see a region preference screen similar to
the one shown below. Select the region that is best for your area by pressing the [RED]
button, or to get further regions press the [oK] button (if available).
5. A summary screen, like the one below, is shown. Press the [oK] button to exit the
automatic tuning process.
Congratulations the Digital TV recorder is now ready to use.
HDR5010 User Guide.indb 15

Automatic Tuning

15
22/07/2010 10:38